Hello everybody, i have already milled a few things with the rotary module. The sample file the lions. Then I created my own STL file. With this I generated the Gcode in Luban. I used several steps for the depth. As a result, I had several rotational offsets in the model. The same model with 1 deep…

Where is your origin in fusion and how is the z axis oriented? I ran into a error when I posted my gcode with fusion but I re-setup/defined my origin/axis and it solved the problem. Origin on the front face, center of the axis, z up. Fusion free doesn’t support the newer multiaxis rotary toolpath…

Fusion und Rotary Modul

Snapmaker 2.0

Georg2 August 8, 2021, 11:53am 5

Fusion 360 setup for Rotary Module - Snapmaker 2.0 - Snapmaker: where creation happens

Thought that happened.

1 Like

Topic		Replies	Views
Fusion 360 setup for Rotary Module Snapmaker 2.0	16	6436	September 19, 2024
Artisan 4 axis Rotary Module - Postprocessor with Fusion 360 Snapmaker Artisan gcode , 3dmodels	3	932	September 19, 2024
Fusion 360 + Rotary Module Help! Snapmaker 2.0	0	355	July 21, 2021
Rotary Module with Fusion360: It works! (good enough) Snapmaker 2.0	12	3805	February 20, 2022
New Rotary Module Questions Snapmaker 2.0	18	7533	February 11, 2021

Fusion und Rotary Modul

Related topics