I have the same problem, the filament is stuck in the hotend but always the right left no problem. What now ??

There isn’t a fix… basically just waiting for snappy to tell us what’s wrong and give guidance.

After some successful prints, i had three times clogging Yesterday again. Thats so frustrating

I bought an declogger. They’re on amazon and Etsy. I was having clogs in my right nozzle and I unloaded it and pushed it out. Didn’t help my left nozzle which had a piece of broken filament in it and the stuff in the nozzle was carbon/gooey. Declogger seems to work well.

Do you want to print non-stop? YES YES Keep it cool.Dual extruder Snapmaker 2.0 right extruder getting clogged solution !!! Nice sales pitch In addition to removing support, it is also difficult to get filament residue out of a jammed nozzle. Hopefully you won’t have to deal with it for long with…

Just a sanity check: What filament do you use in the right extruder? I had the same problem with my right extruder. I always used the breakaway support material when testing the dual extruder head. The Breakaway support needs ~20° more than pure PLA. After setting the right temperature, everything …

any other updates on this, maybe in another thread I just haven’t found? I also had the right extruder get stuck, and I can’t figure out what to do about it. This is common, I take it? I just got my extruder a little bit ago.

[image] Dual Extrusion Head: Heat creep discussion thread Snapmaker 2.0 Hi all, so finally got around trying the new door design, and it was a full success! The model that failed after less than 20 mins before, now went through in 7 hours. The filament does not show any h…

Filament is stuck - Dual Extruder

Snapmaker 2.0 (3-in-1)

xchrisd July 18, 2023, 5:49pm 9

Topic		Replies	Views
Dual Extrusion - filament stuck in nozzel (not clogged) Snapmaker 2.0 (3-in-1) Accessories	18	2067	April 19, 2025
Dual extruder upgrade kit installed: Left nozzle still plugs up Snapmaker 2.0 (3-in-1) Dual-extruder	13	701	September 13, 2023
Dualextrude hotend stuck snapmaker 2.0 Snapmaker 2.0 (3-in-1)	7	648	August 13, 2023
A nozzle of my printhead got clogged Artisan (3-in-1)	31	3345	July 3, 2023
Hot end for dual extrusion module clogged Snapmaker2.0 Troubleshooting guides Feature-Request , Bug-report , Dual-extruder	12	446	May 22, 2024

Filament is stuck - Dual Extruder

Related topics