Has anyone found that they can lower the filament holder on their A350T so it will fit inside the enclosure, even before you put the printer inside of it? I will be doing a lot of testing before I put the printer in the enclosure, so I was courious. Thnaks.

[image] Filament holder with enclosure Snapmaker 2.0 Just finishing building my A350 enclosure. Wonder why the filament holder is being placed on the outside of the enclosure. If you lower the holder arm on the z axis there is plenty of room to put the holder on the insi…

@brent113 Looks like it’s mounted at the fourth hole down on the Z module? How id you mount the power controller?

I’ve printed this holder/mount (original and mirror image) and so far, it works like a charm. Mine is mounted to the outside of the left Z axis, higher and ‘upside down’ with the horizontal length at the top, the spool does encroach a little over the bed, but the spool does fit within the enclosure…

I have mine just lowered a couple screw holes. Works great. I did add bearings and a fender washer to help the spool spin and not slide off the end. Some people were worried about losing build volume, but I’ve never printed anything close to that big and even if I did I’m not sure it actually lose…

[20220121_090409] If you want the spool mounted in an easy to reach location, I have made this adapter to allow multiple angles depending on how you use the enclosure. I am using bearings on the spool shaft so creating some drag on the spool has helped with printing TPU fast while keeping the spoo…

Filament hold location?

Snapmaker 2.0 (3-in-1) Snapmaker2.0 Troubleshooting guides

brent113 December 14, 2021, 4:51pm 2

Topic		Replies	Views
A350 enclosure, alternate filament position Snapmaker 2.0 (3-in-1)	26	4607	January 23, 2022
Filament holder with enclosure Snapmaker 2.0 (3-in-1)	15	3683	March 31, 2021
Spool Holder inside enclosure? Snapmaker 2.0 (3-in-1)	24	3411	December 20, 2022
How Much Headroom is in the Enclosure? Snapmaker 2.0 (3-in-1)	13	656	December 11, 2020
Anyone created a filament holder for enclosure? Snapmaker 2.0 (3-in-1)	13	7907	June 15, 2021

Filament hold location?

Related topics