Dear all The F350 is new and was working for about half a spool pretty smooth. Firmware is up to date. But now and suddenly, it shifts layers by about 45° to the right (Y-axis) every layer. It affects objects that print for more than about 3 hrs and rather round objects. Smaller print sessions do …

Its time to end the story. I have been in touch with Snapmakers support and I have gotten 2 new modules. It now prints very well. [image] I’ve noted a few learnings I’ve made below. Maybe it helps others. It certainly is a pitty if such a nice device fails at early use. But I have to say, the sn…

F350 layer shift 3D print

Snapmaker 2.0 (3-in-1)

noviceiii September 19, 2022, 10:14am 2

A bit more precise: it shifts in the Z axis only and I have also added fotos.

Don't buy a snapmaker it is of poor quality

Topic		Replies	Views
HELP Layers out off line Snapmaker 2.0 (3-in-1)	54	1376	May 13, 2021
Layer shifts, need help Original (3-in-1)	6	1287	January 22, 2020
Still can't believe all these layer shifts - RESOLVED as Slicing Issue Snapmaker 2.0 (3-in-1)	132	6131	September 4, 2024
Shifted layers during printing Snapmaker 2.0 (3-in-1)	29	2970	May 19, 2022
Snapmaker A350T Extreme Layer Shift + loud y-Achses Snapmaker 2.0 (3-in-1)	17	800	January 25, 2023

F350 layer shift 3D print

Related topics