Hello, I’m new to Snapmaker and have only done a few prints so far. Since installing the A350 enclosure, there is a message popping up to inform me that the enclosure firmware is out of date. However, I can’t seem to find any instructions on how to update it. The controller itself it on the latest…

My understanding is this applies to the enclosure as well. Just load the firmware with the enclosure connected normally, and it will upgrade. [image] Upgrade the Toolheads Separately with Snapmaker Firmware V1.12.0 Official Articles To use the Emergency Stop Button and the…

Enclosure firmware outdated

Snapmaker 2.0 (3-in-1)

brent113 June 30, 2021, 8:05pm 2

My understanding is this applies to the enclosure as well. Just load the firmware with the enclosure connected normally, and it will upgrade.

Topic		Replies	Views
Enclosure Error Message with Latest 1.14.3 Firmware Snapmaker 2.0 (3-in-1)	3	524	November 2, 2022
Startup indicates need to update firmware for enclosure Snapmaker2.0 Troubleshooting guides	9	1277	December 2, 2021
My CNC says it needs new firmware but the setting say firmware is up to date Snapmaker 2.0 (3-in-1)	1	731	December 15, 2021
Enclosure not being recognized Snapmaker 2.0 (3-in-1)	19	4524	May 13, 2021
Upgrade to latest firmware - modules? Snapmaker 2.0 (3-in-1)	2	827	April 4, 2021

Enclosure firmware outdated

Related topics