I am looking to print 32mm scale miniatures and I am finding I need tree supports which are only offered in Cura. I would also like to put a 0.2mm nozzle on the hot end so I can get the best quality possible. I tried following all the info I could find online and when I exported the gcode the bed d…

yes, _layer_0 is the missing part between yours and mine. If you dont use that, it will only use the standard temperature across the whole print. Which prevents you from putting down a hot first layer for better adhension

Speaking of Cura settings for the A350: What Support Line Width should the profiles have? The profiles I’m currently using (which originally came from Snapmaker) have 0.4 as the Support Line Width. Put simply, that’s too thick. It’s producing supports as strong as finished parts, and impossible t…

Thats the standard Cura setting for 0.4mm nozzle. I dont think that should impact removal of the part. If it was less then Cura would just print more lines. I find the main settings that impact support strength and removal are the support density (default 15%) and the support distance (default 0.1…

[image] pwvandeursen: Not tested runout sensor and power recovery yet. OK, good news. Runout sensor works when sending direct from Cura to SM2. I am very confident power recovery also works. The moment I first tried the new plugin to send a print from Cura direct to Snapmaker 2, I saw imme…

Re: Cura Support Line Width I was printing from Cura, with default settings on Supports (15% density) with the only change being from “ZigZag” to “Grid” and the result was way, way, way too strong. Was printed using Premium PLA, aka PLA Plus. I had not made any changes to support distance. No signs…

I had always understood that Grid gave too strong a bond if printed in the same material as the model and was mainly intended for dissolvable support like PVA on dual nozzle machines. There is a fairly interesting summary of Cura support options, don’t know if if you are seen it. Seems like way to…

Just popping this here for anybody it might help. Here are my Snapmaker 2.0 A350 Cura profiles for PLA as well as machine settings and start/end gcode. [image] Kaouthia/Snapmaker-2 This is my archive of files for the Snapmaker 2.0 A350. At the moment, that primarily means my Cura 3D pr…

That gcode looks great. Do you know if there is a gcode command that will run the auto leveling before it starts printing? My Creality printers use G29 T.

Cura settings for the A350

Snapmaker 2.0 (3-in-1)

Carsten March 1, 2021, 3:34pm 54

I printing with Cura 4.8.0 now… I have watched this tutorial:

1 Like

Melty on the left / Gappy on the right - no goldilocks to be found

Topic		Replies	Views
Suggestions for removing supports without destroying the model Snapmaker2.0 Troubleshooting guides	41	5080	October 19, 2020
SM2 Simplfiy3D profile Snapmaker 2.0 (3-in-1)	53	8172	January 25, 2021
Profiles for Snapmaker 2.0 Snapmaker 2.0 (3-in-1)	41	17948	November 19, 2023
Advice for the New Guy? Snapmaker 2.0 (3-in-1)	30	4181	September 30, 2020
Cura Snapmaker Plugin released Snapmaker 2.0 (3-in-1)	70	9739	February 6, 2024

Cura settings for the A350

Related topics