stewl
February 22, 2021, 12:28pm
53
I also like to check the head to bed position every print and this is the solution I came up with using Cura. Means I keep my Z adjustment value even after a head/bed change.
On a “standard printer” the Z probe is used every time you print to check ”where the bed is”, you add on the Z offset, the distance between the sensor and the nozzle from the M851 value to put the nozzle at exactly the same height every time you print. This is a very consistent process and takes into account any movement/slop or change in the printer frames or structure every time you print.
Snapmaker bed position is measured by the user when they manually set the nozzle height during the final…