Haven’t used the CNC function for quite a while. Starting working on a project this week and had the problem detailed below. Updated Luban to 4.11.0 to see if that would fix it and it doesn’t. The error occurs no matter how I set up a project. I tried just adding a few shapes, loading an image a…

Exactly the same has just happened to me on 4.11.0 I found this cured it, no idea why: [image] Luban 4.7 "Something went wrong. Please reload the app" Snapmaker Luban Updated to Luban 4.7.0 and now I get this message at startup: “Something went wrong. Please reload the a…

No problem here. Tried a DXF and a PNG.

Which version of Luban are you running? Did a full uninstall of Luban and reinstalled version 4.11. Still getting error on CNC. Tried laser using Snapmaker-supplied phone holder project. Getting same error when I do “Create Path”. Not sure where to go from here

[image] PLGirard: Which version of Luban are you running? Same, 4.11.0 Try going back a version or two.

Just tested it on my Luban 4.11.0 installation. It runs fine and can process an imported SVG without issues. Installed on Manjaro Linux

I tried this and I am back in business. I agree it seems totally random that this fixes the issue. Unfortunately it also deletes a lot of stuff (settings, preferences, etc.) that are a pain in the butt to walk through again. If this should happen again, I may try to delete one subfolder at a time…

I’ll have a go at experimenting with restoring parts of that folder from the recycle bin bit by bit to get some of the settings back and to work out what is causing the problem.

OK, I tried my suggestion above, and discovered it’s the file ‘machine.json’ in the ‘Roaming’ folder that has the problem. After discovering this I restored the whole thing from the recycle bin but replaced ‘machine.json’ with the file copied over from a new installation.

I’m having the same problem right now and trying to figure out a solution.

Create Path in CNC processing no longer works

Software Snapmaker Luban

Boxkite March 23, 2024, 11:28am 5

Exactly the same has just happened to me on 4.11.0
I found this cured it, no idea why:

Topic		Replies	Views
Can't make toolpaths for CNC Snapmaker 2.0 (3-in-1)	3	377	February 11, 2024
Luban 4.7 "Something went wrong. Please reload the app" Snapmaker Luban	6	1332	May 18, 2024
Luban Crashes on CNC Demo Project creating tool paths Snapmaker Luban	5	65	March 9, 2026
Luban CNC Something went wrong Snapmaker2.0 Troubleshooting guides	5	417	January 27, 2024
V4.12.0 toolpath issue Snapmaker Luban	3	229	July 15, 2024

Create Path in CNC processing no longer works

Related topics