I figure it might be good to start a topic that sort-of compiles useful guides together to make them easier to find, since the forum doesn’t allow signatures and guides can just disappear into the void. As such, in this first post, I’ll be listing all of the guides I’ve made, be it how to run projec…

These aren’t my guides, but I post links to them a lot: [image] 3d Print Guide_Walk Through Getting Started First of all, congratulations to a great machine! If you have any suggestions to this topic, feel free to send me a PM! You are new to 3d printing?- Be patient. Th…

Adding @Slynold ’s guide for using the camera with lightburn. [image] Working camera capture with Lightburn Snapmaker 2.0 Update 17.12.2022 I removed the OBS camera and added the step to install @Mayco s Snapmaker Lightburn Host. Update 16.12.2022 Hello all, as promise…

An add-on guide for the full lightburn control, allowing you to start them via wi-fi without Luban; [image] Guide: Automatic Start via Drag/Drop Snapmaker 2.0 This is the “wireless” portion to round out my full Lightburn control guide, found here: Since my main snapmak…

Multiple Luban connections simultaneously. [image] Howto: Connect Multiple PCs to the Same Machine Snapmaker 2.0 I discovered this back when I was making my drag/drop scripts, but am only just now deciding to drop it on the forum. Wasn’t sure it’d be useful or if anyone w…

Can we get a summary/link for the dual extruder plastic clip that was suggested by Snapmaker in here? I am trying to track it down and it feels like it should belong here.

I don’t have the dual extruder, so I can’t say I’ve heard of that.

Quick guide on bypassing the door switch on the enclosure just incase yours goes out, or you need to run a project with the door open. [image] Bypassing Enclosure Security Snapmaker 2.0 In a thread about trying to engrave something long enough you need the enclosure door …

Finally got a new one for the IR: [image] 1064nm IR+20/40W + Lightburn Guide Snapmaker 2.0 With the new IR laser coming out, I figured testing and guides would follow. Lucky enough, it seems with minimal tweaks, Lightburn works with the new IR just fine. slight_smile So h…

Overly complicated, hacky, non-recommended way to add header g-code to laser jobs made by Luban. Really should be a feature in Luban. [image] Repeatable Origin In Luban Snapmaker Luban To preface; this is a bit hacky and requires you to make an edit to one of Luban’s insta…

Some touchscreen modifications. [image] [GUIDE] How to install apps on your Snapmaker 2.0 LCD - Access Android part of LCD Snapmaker 2.0 (3-in-1) Snapmaker runs on Android 7 Yep, and you can access it with a Keyboard. Credit goes to @jbot for describing the me…

Collection Of Guide Links

Snapmaker 2.0 (3-in-1) Snapmaker2.0 Troubleshooting guides

Skreelink April 8, 2023, 8:34pm 6

Multiple Luban connections simultaneously.

Topic		Replies	Views
Accurate, Repeatable Laser Guide Snapmaker 2.0 (3-in-1)	17	6913	November 14, 2023
Snapmaker 2.0 A350T and Lightburn Snapmaker Luban	112	3397	November 3, 2023
Full Control Lightburn + Rotary Guide Snapmaker 2.0 (3-in-1)	9	2189	April 17, 2024
Comments on Quick Start Guide and Laser User Manual Snapmaker2.0 Troubleshooting guides	17	3846	February 16, 2021
Lightburn with Snapmaker Libary for rotary Snapmaker 2.0 (3-in-1)	3	161	October 28, 2024

Collection Of Guide Links

Related topics