I was using the laser modules yesterday and had no problems with the camera capture. Today I went to use it and when I clicked camera capture, add background, start, the module got into position and then nothing happened. No pictures were taken. It just froze at the first picture location. I restart…

I have the same issue. Have you sloved it?

I always put a white A4 sheet of paper under my object. And close the door of my housing against extraneous light.

High contrast things like some a4 paper works some of the time I’ve found but not all of the time. My solution has been to just not use the camera capture feature… Too much of a pain with this bug.

I have the same issue. The camera will not scan after installing the update - meaning the most current update

I have the same issue. Installed the update and camera capture does not work! Brand new machine. It would be nice to see it work.

You can revert the firmware back to 1.13.2 But camera capture doesn’t really work even when it works. Terrible implementation. Better, faster, more accurate ways to position your work. -S

I have the same problem with the camera. The function worked only once. Most of the time the device stops at the start position and does not take a picture. If you calibrate very fresh it makes maybe 2-6 pictures and stops afterwards. I can’t reproduce the error stably, or discover a sure way to mak…

I haven’t tried using the Lazer prior to 1.14 being loaded. I did notice in Luban that the Lazer, Enclosure and Emergency stop button are listed but not the enclosure, while one the SnapMaker screen the camera is also listed.

How do you position your work then?

A few ways: Mark the center on your workpiece and align dot (either moving workpiece or head/bed) with that. (use tape if you don’t want to mark up your workpiece) Use the cnc bed. I made a series of squares and circles and lightly lasered engraved the cnc bed at default work origin. Works really …

Camera Capture Not Working

Snapmaker 2.0 (3-in-1)

Blauskink February 6, 2022, 12:37pm 15

Very simple tip at least for those who use an enclosure.
Before recording the laser area, please turn off the lighting of the enclosure and everything works fine!

Help 10 watt laser owners

Topic		Replies	Views
Camera Capture still broke Snapmaker 2.0 (3-in-1)	1	499	March 28, 2022
Latest Firmware issue Snapmaker 2.0 (3-in-1)	35	3249	January 1, 2022
Snapmaker 2.0 Laser camera caputer issue Snapmaker 2.0 (3-in-1)	22	2914	August 1, 2022
Camera Capture Freezes Snapmaker 2.0 (3-in-1)	11	1675	January 13, 2021
Laser Module broken? Snapmaker 2.0 (3-in-1)	9	998	November 21, 2021

Camera Capture Not Working

Related topics