Hello, i had problems with my nozzle so i disassemble my Printhead. to clean it and fix the Problem. After i assemble the Printhead again. Now my Levelsensor is on a wrong position so the nozzle go in the bed if i autolevel the bed. Have somebody an idea how i can fix the problem and recalibrate t…

If you disasembled the printhead, be sure to have the hotend correctly installed, It is possible that the heatbreak is not mountet correctly, have a look at it, it can eventualy go more inside the printhead.

Either the nozzle isn’t all the way seated in the hot end or the hot end itself hasn’t been inserted all the way. -S

Calibrate the leveling sensor

Snapmaker 2.0 (3-in-1)

xchrisd April 2, 2020, 5:47pm 2

Hey @FatMasterM
Look at this thread:
Snapmaker official response to print head gouging?

Topic		Replies	Views
Issues with Autoleveling Snapmaker 2.0 (3-in-1)	4	722	February 17, 2021
Autolevel Problem Snapmaker 2.0 (3-in-1)	6	679	February 23, 2021
Need help with Proximity sensor adjustment/alignment Snapmaker 2.0 (3-in-1)	6	1144	February 21, 2023
Adjusting the proximity sensor Snapmaker 2.0 (3-in-1)	11	5342	July 7, 2022
Bed Leveling problem - Help! Snapmaker 2.0 (3-in-1)	7	784	February 6, 2022

Calibrate the leveling sensor

Related topics