I have a model I want to print using 3 different filaments. It’s designed so that the lower part of the model is in one filament (black TPU), the middle in another (white PETG, which bonds very well to TPU), and the top in another (black PETG). I want to use PETG on the top to get cleaner results th…

A filament change in between is always challenging, because you will have trouble in retracting the old and pushing the new filament into the module without stopping the print. An option would be cutting the not used filament off right above where it is feeded into the extruder and once the feed st…

Best way to do 3-color printing

Artisan (3-in-1)

Hauke January 29, 2025, 9:51pm 3

Not sure if this is interesting for you, but @xchrisd seems to have first successes with the 3D Chameleon: 3d Chameleon - up to 4 color/material printing with Single Extruder

Topic		Replies	Views
Dual/Tri colour filament with Dual Extruder - found a simple workaround! Snapmaker 2.0 (3-in-1)	1	719	March 31, 2023
Using two different filaments during a print Snapmaker 2.0 (3-in-1)	11	2916	September 18, 2021
Changing filament type during a print job Snapmaker 2.0 (3-in-1)	3	2279	March 15, 2021
Dual filament print? Artisan (3-in-1)	8	691	December 24, 2024
Dual Extruder and filament color change (Luban) Snapmaker 2.0 (3-in-1) Gcode , 3D_Models	2	587	September 16, 2023

Best way to do 3-color printing

Related topics