What programs do you use to prepare 3D printing. We share the profile settings. Tested programs. snapmaker-luban v3.10.2-win-x64 score 3, few settings, very long G-Code prints Simplify3D v4.1.2 score 4, many settings, G-code prints 2 times faster, the quality is excellent, the disadvantage is p…

I use S3D primarily, but occasionally Cura. I posted my FFF file for my A350 at the bottom of this post: Snapmaker 2.0 Initial Calibration Settings / Experiences . I made a few changes to the one provided by Snapmaker. S3D has fewer bridging and support controls than Cura. Overall I find “standard” …

I’ve mostly switched to Cura for 3D printing. It’s pretty much the same as Luban, just with all the advanced settings available. Luban uses the Cura SteamEngine library to do the actual slicing, so it’s not surprising. The UI is pretty much the same. Because Luban is using Cura SteamEngine, the …

Libyan hides too many Cura settings!

I have been enjoying cura, there are so many variables to play with. The start and end g-code availability is a bit hit or miss, I recently fine tuned mine to obey the initial layer temp and initial bed temps after doing some research. I am also not entirely sure I am using the correct machine con…

When Using Cura. Make sure you use my Plugin to export the Gcode. With the Plugin all information for the Touchscreen is added, as well as the preview picture. https://github.com/Razor10021990/SnapmakerGcodeWriter

Ohh. i didnt know this was a thing. ill give it a try. THANKS!

My CURA settings. Setting up the Snapmaker A350 printer [Screenshot_A350] ;Start GCode begin M140 S{material_bed_temperature} ;Start heating bed M104 S{material_print_temperature} ;Start heating extruder G28 ;home G90 ;absolute positioning G1 X-10 Y-10 F3000 G1 Z0 F1800 M190 S{material_be…

[image] MooseJuice: I really recommend at least trying Cura for generating the G-code then opening it in luban to export to the machine. Luban does OK, but I am able to do so much more fine tuning. I use a USB drive on my v1, so I don’t need Luban at all. I don’t know if this is an issue wit…

Same here. Both my machines get usb sticks after i had dropouts over usb. (Not sure if a sudden layershift is related, didnt get one since switching). Also prevents your print to fail if you close cura by mistake.

Yeah there’s many ways to run jobs, and from Luban (or Cura) on your PC is the sometimes easiest, but the worst for the reasons you stated. WiFi upload will be as stable as USB stick, and doesn’t require all the plugging and unplugging. For 3DP, I use an Octoprint print server.

3D printing software

Snapmaker 2.0 (3-in-1)

zvalentine22 November 27, 2020, 10:14pm 20

Don’t know about the plugin you all talking about but I whipped this up this afternoon:

Topic		Replies	Views
SM2 Simplfiy3D profile Snapmaker 2.0 (3-in-1)	53	8295	January 25, 2021
Cura Snapmaker Plugin released Snapmaker 2.0 (3-in-1)	70	9940	February 6, 2024
Cura vs. PrusaSlicer Snapmaker 2.0 (3-in-1)	25	8263	January 27, 2021
Using Cura, How best to send GCode to Snapmaker? Snapmaker 2.0 (3-in-1)	9	7394	May 23, 2021
What software do you use Snapmaker2.0 Troubleshooting guides	45	12681	April 13, 2021

3D printing software

Related topics