I would like to know more about trying different software? for projects, I’m just now getting my feet wet with all the terminology, so I know i sound like a complete rookie haha! At what point did you feel it was time to branch out? and thank you for the offer of assistance, I really appreciate that…

Hey! Does this mean you got a print? (I know it’s not what you want, but that would be a lot better than a black screen. I watch a lot of Yout videos on this sort of things. Guys like CNC kitchen etc. (I can find the actual list if you like). And someone said you should use real design software and…

To help with the learning curve, check out this video: 3D PRINTING 101: The ULTIMATE Beginner’s Guide - YouTube Then continue on with this series: 3D Printing Basics! Series (Ep1) - YouTube

[bearded head] Here is the 10 hour build, I changed the settings in Luban for the slowest and thickest possible build (used a sharpie for size reference). I am currently building the body now, with a 17 1/2 hour print time. I thought when I downloaded a Gcode that it would download with the proper…

Thank you for the info! Do you also use Luban? If so, how do you change those parameters in the software? I did change some settings, but I don’t see where to change to “cubic pattern” or the percentage :grimacing:

Awesome links! Thank you so very much!!

In Luban you find it here: [grafik] I just looked at the Luban Defaults, and I suppose if you select “Normal” print, you should have good settings for a first print: [grafik] It has 6 top layers, and 15% infill per default - that should work.

Thank you!! I have a question for you, I’m trying to make a couple of things for the grandkids, and the print is leaving holes where the filament isn’t sealing the surface. I have tried a couple of things, but before I start again and waste the filament, I’d like some direction. In your opinion, is …

we would need pictures to give a good guess :slight_smile: also the material you are using

[shark pic] Product is from Amazon, 1.75mm PLA silk filament, the brand is 3DGenius. It’s from Shenzen China Someone said it doesn’t have inner wall support. I get that. but someone else had to have been successful at printing this, so how did they do it? I didn’t enlarge it, I printed as is. Ch…

I’m having the same problem with infill not going into my prints. Don’t know how to fix it.

Rebecca, please ask your question just once in the forum. You posted this picture at least in three topics and it would be clean and efficient if you ask only once per problem. You would get the same amount of answers but it would consume less time of the helping members… Thank you for understand…

3D print doesn't completely seal the surface of the project

Snapmaker 2.0 (3-in-1)

wilsonrobertt November 19, 2024, 5:20am 25

so…no infill sounds like vase mode

under Model Structure is Model Structure Type which needs to be set to Normal

2 Likes

Firmware update help

Topic		Replies	Views
Machine not Filling in this Corner Snapmaker 2.0 (3-in-1)	27	1301	August 10, 2021
3D Printer Under extrudes or not at all Snapmaker 2.0 (3-in-1)	32	5711	August 27, 2020
3d printing problems I have Snapmaker 2.0 (3-in-1)	88	2219	August 31, 2023
Please help, I don’t understand what setting I need to adjust Snapmaker Luban	71	1655	March 25, 2023
How can one fix Infill that won't connect to Innerwall? Original (3-in-1)	5	467	November 16, 2020

3D print doesn't completely seal the surface of the project

Related topics