Been using my A350 for over a year with mostly the 3d printing. I’ve noticed more lately a rocking of the print bed when printing items that are a little taller although it rocks for all prints actually. My concern is the higher it gets the more likely it will knock the piece over because of this …

I’d double check all the screws are in place. I haven’t had mine long, and then noticed a couple of screws sitting under the bed. Then realised that these are the ones that secure the base to the linear drives.

This is a known issue. If you’re really having severe problems, additional passive rails underneath the bed can help ( Minimize rocking has a recipe, although you’ll have to read much of the thread to collect the necessary details).

[image] Excessive play in x-axis linear module bracket Snapmaker 2.0 The mounting bracket on the linear module on the x-axis on my A350 is loose. The toolhead is tight to the bracket but the bracket itself now rocks up and down a millimeter or two. I couldn’t tell if ther…

3d print bed rocks back and forth

Projects, Tips & Mods Showcases & Tips

sdj544 August 9, 2022, 1:26am 4

-S

Topic		Replies	Views
A350 Bed Wobble (A350) Snapmaker 2.0 (3-in-1)	8	2528	April 26, 2022
Wobbly Print Bed, I can't do large prints now Snapmaker 2.0 (3-in-1)	7	1429	September 17, 2021
Problem with the bed at the time of printing it sags Snapmaker 2.0 (3-in-1)	2	496	January 13, 2022
A350 Bed rises and falls even during slow speeds Snapmaker 2.0 (3-in-1)	15	2186	June 10, 2020
Struggling getting full use of printed area (A350) Snapmaker 2.0 (3-in-1) 3D_Models	6	237	July 2, 2024

3d print bed rocks back and forth

Related topics