3D Models for A350,A250, A350T platforms and A350 Beds

Snapmaker 2.0
1

Hi,

I created this thread to not again revive the old one about platform dimensions found here:

https://forum.snapmaker.com/t/a350-platform-dimensions/6755/48

For those of you who want to design stuff to mount on the various Snapmaker 2.0 platforms, you find the 3D models here:

https://cults3d.com/en/3d-model/tool/snapmaker-2-0-platform-3d-model-a250-a350-a350t

For 3D models of the beds for A350:
https://cults3d.com/en/3d-model/tool/snapmaker-2-0-a350-printing-laserbed-wasteboard-3d-models-drawings

Notes:

If you directly remix these 3D models, please respect the license and keep them uploaded only to cults3d, so that they can be easier found.

I personally only have the A350 model. Feel free to share the dimensions of your Snapmaker 2.0 variants here. :wink:

Have fun! :upside_down_face:

7 Likes
3

Hi, i would like to do future designs that users of both machine sizes (A250 and A350) can use.
Can someone post here the dimensions of the A250 beds?

For the laser bed: width & length of the single pieces + a photo of the assembly would be nice.
For the wasteboard, width & length, as well as the spacing of the clamp-mounting holes (+ a photo).
For the printing bed: width & length (+ a photo).

All other dimensions & details should be the same for both models, I suppose.

Thank you very much. :slight_smile:

4

You can get a 3D model and drawing of the CNC Toolhead here: