I am aware that there are others out there with issue not being able to get past the required initial calibration steps. Mine gets stuck on the calibration with the metal plate. I’ve reached out to Snapmaker support and haven’t heard anything back. I’ve read all sorts of ideas to get it working a…

At least firmware 1.14 installed? [image] [Firmware Released] 10W High Power Laser Module is NOW compatible with Snapmaker 2.0 A150 Snapmaker 2.0 (3-in-1) Update (December 15th, 2022): Hi Makers, Thanks for all the supportive feedback and patient waiting! No…

I has installed v1.14.3 last month. I just installed the 1.14.5 version and tried the 10W laser initial calibration. No dice. It fails when it tries to fire up the camera to view the red laser on the metal calibration plate. It’s an instant fail, doesn’t even really try. Since both my 1.6W and …

The Bluetooth server is in the Android TouchPad, which is why the camera only works with a WiFi connection to the TouchPad. You will need to work with Snapmaker Support to determine if your TouchPad is bad, as there isn’t anything that we can repair. While it is possible that the WiFi clients in e…

I have done the reset via TouchPad in developer mode. Experiment > Preferences > Reset All And also did the M502 and M500 via the Console in Luban software. Didn’t help. What is interesting is when in developer mode on the touchpad there is a Factory icon on the Home Screen. Tapping that gives …

Yeah, it looks like there is a problem with your TouchPad. Support should be able to very whether or not it is the TouchPad. If it is, Support should be able to tell you how much a new one will be. I think they’re like $100, but I could be way off. Best of luck…

Well, there is a new development, sadly. I plugged in my newer 3D module and when it goes to load the filament, the gear inside is going the wrong way! Both load and unload go the same direction. I tried my original 3D module and it does the same. Le sigh… I also tried swapping the tool head an…

Unfortunately, it is beginning to sound like you may have plugged in one of the cables backwards, and that it has damaged the Controller as well. Have you opened a ticket with Support? They are the only ones who can help you at this point.

10W Laser Module Not Working out of Box

Snapmaker 2.0 (3-in-1)

xchrisd January 14, 2023, 8:04pm 2

At least firmware 1.14 installed?

Topic		Replies	Views
10W not working on SM2 A350 Snapmaker 2.0 (3-in-1)	5	846	December 2, 2022
New 10W Laser Module not Working Snapmaker 2.0 (3-in-1) Laser	1	103	June 13, 2025
10W Laser doesn't work Snapmaker 2.0 (3-in-1)	2	114	December 14, 2025
10x laser stuck on Toolhead Focus Calibration screen Snapmaker 2.0 (3-in-1)	24	1696	November 11, 2025
Ma Snapmaker 2.0 ne reconnaît pas mon laser module 2W 1064nm Snapmaker 2.0 (3-in-1) Laser	1	88	July 31, 2024

10W Laser Module Not Working out of Box

Related topics