I had a 3 day print going and it was about 85% finished when I went to bed. Got up in the morning and the bed was all the way back so that printhead was hanging off the front printing filament into the air. I stopped the job and tried to home the machine and while the print head returns to the norm…

There are holes in the base. Move the bed so they line up with the screws. -S

Do you have the 150, or a larger model with the dual Y rails? If it’s the dual rails, they might need to be trammed. Other users have reported that they can bind up if they’re not perfectly aligned. Is it one or both of the rails making the noise? If that was an original, I’d think something fel…

This is the 350. I didn’t notice that the sounds were only coming from one rail but, then again, I wasn’t trying. Sounds like further investigation is in order.

hey, if the noise sounds like the video that clewis has referred to, one of the linear module doesn’t work. I suggest you to contact our support team for help. Just mail to support@snapmaker.com

Finally have the time to get back to looking into this problem and trying to figure out which rail might be throwing fits. It looks like in order to remove the print bed from the rails, I pretty much have to completely disassemble the printer. I thought before I started this multi-hour task, I’d dou…

Thanks that saved me at least an hour!

Wondering if my Snapmaker has died

Snapmaker 2.0 (3-in-1)

clewis May 9, 2022, 11:54pm 4

Is your problem like this?

Topic		Replies	Views
Bed going past rails and making noise Snapmaker 2.0 (3-in-1)	4	510	July 7, 2021
A350 Y-modules making weird sounds, H. bed moving up and down Snapmaker 2.0 (3-in-1)	13	843	November 12, 2021
My 3d printing is weird Snapmaker 2.0 (3-in-1)	2	637	May 13, 2022
Bed is not stable Snapmaker 2.0 (3-in-1)	3	451	April 30, 2021
This Snapmaker 2.0 is so noisy! Snapmaker 2.0 (3-in-1)	21	1497	July 16, 2021

Wondering if my Snapmaker has died

Related topics