Jul 18 2024: Snapmaker2_V1.20.3
Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware.
Changelog
Touchscreen
Bug Fixes
- Fixed a bug that the Air Purifier “Auto Turn On” option was not activated during machining of 20W/40W Laser Module or 2W Infrared Laser Module
Module
Bug Fixes
- Fixed a bug that 2W Infrared Laser Module would automatically emit upon initialization
Improvements
- When 2W Infrared Laser Module is in stand-by, the inner fan running at low speed will be turned off to reduce noise
Downloads
MD5: 08003a89adb5bcb10b0501a3f811f2f2
Notes
- This firmware update is only compatible with Snapmaker 2.0.
- To see your current firmware version, go to Settings > About Machine .
How to Update Firmware
- Via a USB flash drive
- Put the firmware update file Snapmaker2_V{version}.bin in your USB flash drive.
- Plug the drive into the Controller.
- On the Touchscreen, tap Files > USB > Snapmaker2_V{version}.bin.
- Via Wi-Fi
- On the Touchscreen, tap Settings > Firmware Update.
- Read the changelog and download the firmware.
- After the firmware is downloaded, tap Update Now.