[Official] Ready to MAKE for 3D printing

If you don’t know what to make, come here and you will find good or interesting 3D models for printing. We’ll regularly upload 3D models that have been tested by us and can help you gain experience about how to print different kinds of models.
Also, you can check this article for 33 Best Sites for Free 3D Printer Models & STL Files to 3D Print at https://all3dp.com/1/free-stl-files-3d-printer-models-3d-print-files-stl-download/. Thingiverse (https://www.thingiverse.com/) is the most used and recommended. Finding a lovely model to start practising is not a headache anymore. :wink:

Updated on Dec. 30

Here is the model we use to test the leveling of the heated bed. After calibration and before you start to print something you want, use this file to test the leveling first. Please use the Normal Print mode. It will be added to the example models folder in Snapmaker3D in the next version as well.

Test.STL (3.8 KB)

4 Likes

Doung share this links for us:

For the Star Trek fans… when you get your Snapmaker, you can beam out of here https://all3dp.com/3d-print-star-trek-discovery-badges/?omhide=true&utm_source=Newsletter&utm_campaign=3db60a5a6a-Newsletter&utm_medium=email&utm_term=0_9dffeeddae-3db60a5a6a-3948024051

4 Likes

I look forward to other Snapmakers contributing here with many great ideas.
BTW Doug not Doung

3 Likes

@Noah @Rainie

I found another great simple 3D tool to make from the Instructables web site, a Tape Measuring Tool. If you signup, you can download the instructions. Watch the video https://www.instructables.com/id/Tape-Measuring-Tool/?utm_source=newsletter&utm_medium=email
MEDIUM

4 Likes

Hey guys

I tried to color my 3d print sample, this is the picture. I’m fond of drawing, so it’s really have a lot of fun to me :smiley:

4 Likes

Hi @Rainie
SNAPMAKERS might appreciate this reference “50 Best Free 3D Model Download Sites & 3D Archiveshttps://all3dp.com/1/50-best-free-3d-model-download-sites-3d-archives/?omhide=true&utm_source=Newsletter&utm_campaign=06af44ad47-Newsletter&utm_medium=email&utm_term=0_9dffeeddae-06af44ad47-394802405
Doug

1 Like

Hi Doug,

Yes, just saw this article this morning.
Thank you for sharing! =)

Rainie

2 Likes

Hi @Rainie

I cannot imagine how many great references and suggestions that will be shared over the next twelve months from users.
Keep having fun

Doug

2 Likes

Noah, I can’t use “Fast Print” for the Test.STL file because it says “The thickness of model is less than 1 layer.”

Hi Relster

Because “Fast Print” will print in 0.2mm per layer, and the Test.STL is 0.2mm high, so it can’t print. You may use normal Print to preview and test.

Enjoy and have fun.

Hi Doug

I have been having a heck of a time trying to discover the reason why the USB connection to the computer will not allow communication. My computer has 3 USB ports, 2 of them 3.0 and 1-2.0. I did find that the computer will only state that a connection has been made using the 2.0 port, however, the SnapMaker app will not connect. Does anyone have any troubleshooting advice or info on how the port should be configured.
Thank you,

1 Like

@brad.gholson

You should ask Rainie at Snapmaker using @Rainie

Doug

Hey! Dont know if it will help you but there is a windows driver under “downloads & updates” for issues with conecting usb.

1 Like

I would be careful using this model, I had a hell of a time scraping the remains of the heated bed. :wink:

Download does not work, just opens a page that has the below on it.

This XML file does not appear to have any style information associated with it. The document tree is shown below.

AccessDenied
Access Denied
C412B47D52A118C0

dmAsM92/e02fZL/HuZ6Ol/OEgfGVtwIJuX3ufwQjNMkR8k6SPkRlxEQYDyEIYAmtBsGv8/gr4M0=

Where is this example models folder in Snapmaker Luban?

Hi StumbleRunner, the Snap3D is replaced by the Snapmaker Luban, and you can find its download here.
And a example model folder is planned. :slightly_smiling_face: