All documents and tutorials that will help you familiarize with the Snapmaker will be collected under this topic. FAQs are collected under FAQ (Frequently Asked Questions) . If you are new to 3D printing, laser engraving or CNC carving, it’s suggested to read through the documents and watch the tutor…

Calibration tutorial doesn’t fit my received printer. My menu option says “Z Offset”, and when I try it it stack on “Homing…” for more than 10 minutes

Hi Vabavia, The tutorials will use the latest machine to illustrate how to use it. Your printer has the option “Z Offset” because it is not the latest version.

@Rainie I have been slow to get started with my Snapmaker…(busy with other things). I started earlier this week with the laser and it is fantastic. Now about to start with 3D printer… a new experience for me. I have downloaded a number of projects from other great users such as @jstncrft Before I …

@Rainie Thank you for that. I was so keen to get started I ran ahead and used one of the projects on Thingiverse for the filament guide designed by @kelvin8r For a first ever 3D project for me, it was a perfect experience. A couple of photos below. Pity I am not a good photographer. [IMG_0806b] […

@doug , your print turned out really well. Isn’t 3d printing fun? :grin: There are several great projects on Thingiverse to customize the Snapmaker. The Storage for Snapmaker accessories and tools is one of them.

Hi @kelvin8r I was not sure what to expect. The quality was brilliant; I only used the Normal Quality print option. At first go for a minute it would not stick to the hotplate. So I added a raft base and restarted and all went brilliantly well. Thank you for the great project to get started with. I…

@doug I printed the same object but mid project I noticed too that it was not sticking to the plate so what I did is I used the custom setting and change the temp of the bed plate to 70° instead of the default 50° and it worked ! It stuck all the way to the finished object :slight_smile:

@delislehatte Keep in mind I am a newbie and any of my suggestions, although they work fro me, nay not be the correct answer. The only change I made was to add a RAFT base to start with. I have found using RAFT is great for most projects Calibration is very important. Did you calibrate before pr…

[Official] Documents & Tutorials

Snapmaker 2.0 (3-in-1) Snapmaker2.0 Troubleshooting guides

Rainie February 11, 2018, 10:18am 6

It’s here: [Official] Ready to MAKE for 3D printing

Topic		Replies	Views
3D prints are turning out badly Original (3-in-1)	15	2329	March 22, 2020
Random HELP - Ask here! Snapmaker2.0 Troubleshooting guides	165	8149	January 12, 2021
Tutorials for the very beignners Official Articles	3	4051	April 23, 2021
Any tutorials available? Snapmaker2.0 Troubleshooting guides	14	1724	March 22, 2018
First layer printed filament displaced Snapmaker 2.0 (3-in-1)	23	1089	January 10, 2021

[Official] Documents & Tutorials

Related topics