The difference is machine location vs work location. On Z, the difference is your laser focus height. It seems your laser focus height is 24.4mm. This means that at Z24.4 your laser is focused directly onto the bed, under this and you will crash into the bed.
I assume you’re using the 1.6W that came standard, since you know your laser focus height, you can follow my guide if you like to use Lightburn with a repeatable origin.
My latest guide, while specifically for the IR/40W, should work with any available laser, knowing your focus height is the most important.
In my guide, in the lightburn header you’ll put your Z210.6, which is Section II, step 4.
EDIT: Sorry for responding to the original poster, but I figured the info given to them could help @Shamalama ![]()