Help Qualitaty Check with a Benchy

Snapmaker 2.0
10

Okay, I have at least managed to print a Benchy again:

IMG_2924
IMG_29241920×2560 248 KB

IMG_2927
IMG_29271920×2560 246 KB

IMG_2928
IMG_29281920×1440 149 KB

IMG_2929
IMG_29291920×1440 162 KB

IMG_2930
IMG_29301920×1440 195 KB

The main reasons that made me able to print again were:

  1. Repositioning the polydryer boxes. However, this is only provisional for now, of course:

IMG_2915
IMG_29151920×1440 321 KB

  1. Reset all parameters with M502. Then, of course, recalibrated everything.

  2. I changed the black filament. I had reopened a roll of 3Djake Eco-PLA and it seems to be difficult for beginners, as I have now read in various reviews. Now I have a roll of Elegoo PLA on it, which seems to work much better.

The stringing in the white filament is probably because I’ve had the Polydryer box open for a while now, right?

Where do you position your Polydryerboxes (or similar drying boxes) during printing for ideal filament guidance?

Do you have any other tips to optimize the Benchy?

Thanks for your help so far!

Regards,

1 Like