I changed out my cnc head and put the laser head back on. The machine asked to up date the software which I allowed. The hand controller recognized the laser but when I tried to move the laser down, nothing happens. Can’t move anything anymore. I have reinstalled the software twice and still nothing…

Try to install the firmware again with a usb thumb drive on every module. [image] Outdated module (3D Printing Module) firmware detected Snapmaker 2.0 I get this message when my Snapmaker is not connected to the Luban software on my computer. I’ve updated the firmware to …

Are we talking about the touchscreen or Luban? Try a older Luban version insted of 4.4.0 [image] Snapmaker Luban Downloads and Updates Snapmaker Luban We will release the beta version of the software under this topic. Also, beta version of future updates will be released …

The hand held touchscreen attached to the snapmaker. I can’t make it move in the snapmaker program either. I am unable to make it move at all.

I have reinstalled the software x2 and still no movement. I can adjust the laser strength but when I try to calibrate it, it just does not allow me to move it at all. Please advise.

Could you home your machine? - Before you didnt home you could not jog. Did you try without a toolhead? - Are you able to home and move now? Was your machine proper working before switching the toolheads? Did you read this thread? My guessing is that you have to install a older firmware with the …

I am not able to home the machine, it’s just stuck. I put in a trouble request with the company and they have asked me to take a usb and download the files to them. It might be a bad controller but who knows. Will let you know what they say after they look at the files.

You didn’t answer the questions so it is nobody able to help you.

I am confused. I answered in my last email. No, I can’t home the machine. Also, I have downloaded the files to another person at Snapmaker. Who is my contact on this issue.

Here is the post, please read it carefully. [image] Hand controller not moving x or y Could you home your machine? - Before you didnt home you could not jog. Did you try without a toolhead? - Are you able to home and move now? Was your machine proper working before swi…

Hand controller not moving x or y

Maker Creations Showcase & Prints

xchrisd November 28, 2022, 8:18pm 4

Are we talking about the touchscreen or Luban?

Try a older Luban version insted of 4.4.0

Topic		Replies	Views
Snapmaker Original not responding Original (3-in-1)	11	1085	March 21, 2022
Home and manual movement not working after update Snapmaker 2.0 (3-in-1)	6	1115	December 28, 2021
Toolhead and Bed stuck Snapmaker 2.0 (3-in-1)	11	780	June 22, 2022
Luban Laser Module not working. Showing unhappy face Snapmaker 2.0 (3-in-1)	7	809	May 18, 2021
Catastrophic failure after firmware and Luban update - New 10w laser not working either on Snapmaker 2.0 350T Snapmaker 2.0 (3-in-1)	2	1324	October 9, 2023

Hand controller not moving x or y

Related topics