FYI: Snapmaker 2 & Enclosure Fan Information plus alternatives

Snapmaker 2.0
12

REPOST (After the maintenance of the site I cannot edit the original post)

Here you have the information of the Fans in Snapmaker 2 and its enclosure plus some direct replacement alternatives I’ve found that have similar specs but less noise ( according to specs given, still have not had time to test them):

NOTE: In general, better order ball bearing ones as they will be quieter and more durable, also the connector should be XH2.54. Some stores require you to buy two, but you can also search a bit and find the same model in other stores.

  • Actual PSU Case Fan ( ~7 CFM, ~36 dBA )
    Manufacturer: Shenzen Xinyujie Technology Co. Ltd.
    Model: XYJ24B3510H
    Width/Height: 25mm
    Thickness: 10mm
    Voltage: 24vdc
    Current: 0.08A

    Alternative PSU Case Fan (~6.6 CFM, 27 dBA)
    Alternative PSU Case Fan ( 4.5 CFM, 24 dBA )

  • Actual PSU Fan (internal, ~14 CFM, 29 dB)
    Manufacturer: NMB Technologies Corporation
    Model: 2404KL-04W-B30
    Width/Height: 60mm
    Thickness: 10mm
    Voltage: 12vdc
    Current: 0.1A

    Alternative PSU Fan 1 (~17 CFM, ~28 dBA)
    REMARK: The actual PSU cooling fan is quite good and not noisy, the alternatives are similar or slightly worse in CFM besides that to change it you have to dismantle the whole PSU. I would not recommend to change it. If anyone finds any other alternative, let me know :slight_smile:

  • Actual Enclosure Fan (~45 CFM, 45.6 dBA )
    Manufacturer: Shenzen Xinyujie Technology Co. Ltd.
    Model: XYJ24B8020H
    Width/Height: 80mm
    Thickness: 20mm
    Voltage: 24vdc
    Current: 0.23A

    Alternative Enclosure Fan 1 (43 CFM, 31 dBA)
    Alternative Enclosure Fan 1 ( ~43 CFM, 31 dBA ).
    REMARK: The alternative fans are 25mm thick in place of 20mm, but that should not affect the assembly, also might be needed to re-use the actual cable as it’s longer than the usual ones ( simple cut & paste will be enough)

  • Actual Hotend cooling ( ~3 CFM, 40 dBA )
    Manufacturer: Shenzen Xinyujie Technology Co. Ltd.
    Model: XYJ24B4010H
    Width/Height: 80mm
    Thickness: 20mm
    Voltage: 24vdc
    Current: 0.15A

    Alternative Hotend Cooling 1 ( ~3.3 CFM, 30 dBA)
    Alternative Hotend Cooling 2 ( 3.3 CFM, 30 dBA)
    Alternative Hotend Cooling 3 ( 2.6CFM, 22 dBA )

  • Actual Part Cooling ( ~3.7 CFM, 31 dBA )
    Manufacturer: Shenzen Xinyujie Technology Co. Ltd.
    Model: XYJ24B2510H
    Width/Height: 25mm
    Thickness: 10mm
    Voltage: 24vdc
    Current: 0.07A

    Alternative Part Cooling fan 1 (2.7 CFM, 22dBA)
    Alternative Part Cooling Fan 2 ( ~2.5 CFM, ~27 dBA)
    REMARK: The original part cooling fan is not so noisy and furthermore powerful than the alternative found.I would not recommend to change it. If anyone finds any other alternative, let me know :slight_smile:

EDIT1: New part cooling fan, more CFM/less noise
EDIT2: As suggested by @fillibar, add the description of original fans and some reformatting to make it more clear :relaxed: Also found the real PSU Fan and added it :wink:

I hope it’s helpful :slight_smile:

I’ll do some testing in the future when I have them here. If anyone has some direct alternative, please feel free to propose.

Regards
Franky

18 Likes