Full Lightburn Control Guide

[Skreelink]

@auggieben

Hi Skreelink,
So I’ve had excellent results etching grayscale images on to flat glass with Lightburn. Now I’m trying to etch these images on to glasses using LB and the SnapMaker Rotary axis. Have you had any success with this arrangement?

Maybe give this a try:

Lightburn + Rotary Guide

This is going to be a quick guide on the settings/required modifications to use the rotary module with Lightburn. [PXL_20221222_205047036] I am sorry, but it will require following the beginning of my full lightburn control guide. Mainly flashing the custom firmware (as of writing, make sure you’re on the latest 1.14.3 before loading the custom firmware and do NOT turn the machine off until it’s done). https://forum.snapmaker.com/t/full-lightburn-control-guide/27638 Follow along until the GC…