Hello. Question 1: I have a cover installed and I’m printing a lot of ABS. I decided to try printing the interface layer using “Oak lab” Support for ABS, but there are no corresponding profiles in SnapmakerOrca or the printer itself. Please provide instructions on what settings should be used on t…

[image] AndreyGrey: Please provide instructions on what settings should be used on the printer and in the slicer. What you need to do is set up your own filament profile, See here: Printproblem on new U1 - #9 by ColdCoffee

I was able to export the necessary filaments from the original Orca Sliser. Thank you, but this does not solve the second issue. U1 has several TPU profiles in Generic, but installing any of them does not allow you to use the filament as Machine Filament in Snorca.

For the second one, I think it is more like a software feature gap or incomplete device-software sync, preventing users from accessing the printer’s built-in TPU presets. Can you post a feature request here? I’ll bring it to the software engineering team to check whether it is on the plan? …

Filaments: Support for ABS, TPU

U1 Toolchanger

CrazyIvan July 23, 2026, 11:55am 2

What you need to do is set up your own filament profile, See here: Printproblem on new U1 - #9 by ColdCoffee

Topic		Replies	Views
Orca U1 Version and Setup custom filament? U1 Troubleshooting guides Tips	12	2339	January 14, 2026
Fremdfilamente in Snapmaker Orca importieren U1 Toolchanger	13	625	March 13, 2026
Vanilla Orca U1 third party filament profiles U1 Toolchanger	1	137	May 13, 2026
Snapmaker Orca & V1.0.0 upate issue: "Please Select Filament Type." U1 Troubleshooting guides	1	685	February 2, 2026
Add Direct U1 Printing & Toolhead/Filament Mapping to Vanilla OrcaSlicer U1 Toolchanger	15	675	January 8, 2026

Filaments: Support for ABS, TPU

Related topics