Where can I find the dimensions for the major A350 parts? I need to make a 3D CAD model of it, it does not have to be precise, just to look real. The major parts are the rails, tool heads, PSU, bed, base, etc. I have a PDF of the assembly manual that shows all the bits, but no dimensions. thanks…

Thanks, but nowhere can I find dimensioned drawings. The mod looks interesting and I will review it later. And I do not nor want Fusion360 at this time.

Well Stefix did it in Fusion. so I guess you will need to do it yourself if you dont want to take the dimensions from Fusion.

Thank you. I presume the 2nd drawing is the power supply? Anything on the A350 rails? jgb

I started a 3D model for my Snapmaker A350. I have the linear module almost complete and have to start with the other modules soon. Here is a link to my Onshape CAD if you’re interested. https://cad.onshape.com/documents/62cf14c42bffce0a7b08acf9/w/30314df13cc0199e746100d2/e/7a6692332d9c4b7e83c673c4 …

Thank you. It helped a lot for the rails and bed which I had no info on at all. Just an estimation by eye from photos. Actually I was closer than I thought except for the width of a rail, I was out by an inch too wide. Length was about 1/4 inch too long. I don’t need 11th decimal point precision …

Glad it helped, I will continue to update it so it can have everything in it and aligned properly. I’ll be sure to post when that happens!

Thanks to @RyanTuscher As for the cabinet, @spitzlbergerj has posted a great work and share the dimension in this post. [image] Base cabinet for my Snapmaker 2.0 A350 Snapmaker Showcase After a short time, a lot of material collects around the Snapmaker: tools, screws, mo…

Hi Ryan, thanks for sharing your drawings. I am looking for the most accurate dimensions of the screw holes in the linear modules. And I would need the dimensions of the recesses in the base plate of the A350. Do you have dimensions for me? If I interpret your drawing correctly, you have ignored…

Component dimensions for A350

Snapmaker 2.0 (3-in-1)

RyanTuscher May 25, 2021, 7:57pm 17

Yes, I have started the CAD but haven’t added too much detail to it yet. I will be sure to include these details as I complete it. Thanks for your input!

Topic		Replies	Views
Snapmaker 3D model Snapmaker 2.0 (3-in-1)	5	948	January 31, 2021
3D Models for A350,A250, A350T platforms and A350 Beds Snapmaker 2.0 (3-in-1)	3	1810	May 23, 2022
Technical Drawing A351 from stefix Snapmaker 2.0 (3-in-1)	13	3480	December 17, 2022
Snapmaker Programas Snapmaker 2.0 (3-in-1)	1	327	July 20, 2021
A350 Platform Dimensions Snapmaker 2.0 (3-in-1)	50	10105	March 14, 2022

Component dimensions for A350

Related topics