I now have countless hours, including all nighters, over the past couple of weeks, trying to mark anodized aluminum with Cermark and LBT marking spray. I am using Luban and a vector graphic exported from Inkscapce. I have tried numerous settings all the way down to 100 mm/min, at 100% power, and ha…

Anodized aluminum doesn’t need any marking spray, here’s one I did when I first got the 10W. [image] Snapmaker’s official settings for anodized aluminum are 100% power and 3000mm/min speed as found here: [image] The Definitive Guide to Laser …

How do I get a black “engraving” on unpainted anodized aluminum without the marking spray?

Uhm… the anodization is what gets removed when laser engraving anodized aluminum. It’s not painted at all. Anodization is putting a coating on the aluminum, you can’t laser anything ONTO the aluminum. For that, you’ll need an infrared or CO2 laser.

There might be a misunderstanding about what is the anodized aluminum :slight_smile: @SaltLife3 - give us a picture of what it is you are trying to engrave.

omg, I am so embarrassed. I had purchased aluminum sheet for a different project and grabbed that one instead of the anodized piece. Thank you!!

Glad you figured it out. :slight_smile: Hopefully it comes out great.

Anodized Aluminum & Marking Spray...help

Artisan (3-in-1)

Skreelink July 17, 2023, 11:20am 2

Anodized aluminum doesn’t need any marking spray, here’s one I did when I first got the 10W.

Snapmaker’s official settings for anodized aluminum are 100% power and 3000mm/min speed as found here:

Topic		Replies	Views
Laser engraving on anodized aluminum Snapmaker 2.0 (3-in-1)	7	2142	January 10, 2021
A250 Laser Failure? Snapmaker 2.0 (3-in-1)	10	791	November 15, 2021
Laser Engraving Anodized Aluminum Showcases & Tips	5	3520	July 13, 2021
10W laser on Aluminum question Snapmaker 2.0 (3-in-1) Laser	6	1716	April 19, 2023
Engrave jewelry Snapmaker 2.0 (3-in-1)	3	509	October 23, 2022

Anodized Aluminum & Marking Spray...help

Related topics