Does anyone perhaps have the dimensions of the A350 Platform? I’m looking at having a new platform machined out of 5mm aluminium but would like to keep the holes at the exact same positions. The centre 4 holes, I see is ±90mm apart on the X and 102mm on the Y. The outermost holes are on the X 300…

Thank you! @doug @DroneOn @Waldo This is the dimension of the A350’s platform: [dimension of platform]

That’s perfect for optimizing my replacement Wasteboard design👍🏻

Thank you @DroneOn You guys made my day. =)

Good to see that an A250 heated bed will also fit onto an A350 platform. The holes are at same dimentions.

Phoebe, as a suggestion, can Snapmaker produce paper templates with this layout for sale so that users can overlay them on pieces of wood and drill the holes for use as spoil-boards on the CNC Doug

@doug I’ve created a new spoil-board for myself. I would rather suggest we create a CNC file that can be used. As well as a Laser file to engrave/laser the grid. There are however alignment complications and a single file cannot take care of this. Following was my steps; Mount a 340x360 MDF b…

I already started a cnc file like that [image] A350 Wasteboard Snapmaker 2.0 Is there any documentation about the measurements of the A350 wasteboard? I’d like to model a cnc and laser File, to create my own wasteboards until my pre-ordered snapmaker arrives innocent …

For the laser, the latest Luban has DXF import function. The origin however is moved to centre the drawing. The developers are working on the ability to use the DXF origin. This will help to have a fixed workspace origin related to the DXF

Maybe a dumb question, I’m a Software vs Mechanical Engineer :smile: . How do you validate the platform is level itself? vs the bed plate that screws on top of it? For example if I take off the print surface e.g. magnetic bed, I can measure against the bed plate with a probe and it will reveal a la…

Hi @Dojima It may help to strike up a conversation with knowledgeable Tony @Tone Have a great day Doug

[image] Dojima: or example if I take off the print surface e.g. magnetic bed, I can measure against the bed plate with a probe and it will reveal a large delta. How do I know if it’s the bed plate vs say the platform holding it? You can do that but you’re still going to have to use the leveli…

A350 Platform Dimensions

Snapmaker 2.0 (3-in-1)

Melanchrom May 21, 2020, 6:23am 20

I already started a cnc file like that

I’m just not sure yet how to create the right laser file

2 Likes

Topic		Replies	Views
Bed/Bed Frame not level Snapmaker 2.0 (3-in-1)	27	2447	February 1, 2022
Full metal platfrom replacement for A250 and A350 with direct connect to SBR16 Rails Snapmaker 2.0 (3-in-1) Accessories	34	4382	November 21, 2023
Can you really print the full bed capacity of an A350? Snapmaker 2.0 (3-in-1)	43	2050	October 22, 2021
Is a consistent first layer across whole of A350 build plate actually possible? Snapmaker 2.0 (3-in-1)	37	2565	January 29, 2023
Carriage Tolerances - Unusable Over Distance >75mm From Center Snapmaker 2.0 (3-in-1)	112	6950	July 25, 2021

A350 Platform Dimensions

Related topics