57% Print, Fabscreen Has Stopped Working A350

Second job this has happened, first time posting about it. 57% of way through a 2 and a half day print, come to see print idle, without job information and sitting at home screen. Files from usb flashdrive appear to be missing (they weren’t) and the touchscreen doesn’t work correctly but looks like it does.

I looked up to see if anyone else has had this issue but last i saw it was 1 person with a name Monkeygerbil222 and there was no fix or outcome.

Tried shutting off power and turning back on (multiple time). Machine asks to recover job, i click recover. Machine homes, but i notice the nozzle temp it is going back to is wrong. Machine is trying to heat to 180 instead of 205. When machine gets to 180, it feeds filament a little bit and begins to return to job position. A few seconds after remaining time has been calculated, touchscreen produces error of fabscreen has stopped working. In my last attempt to restart job, i adjusted nozzle temp back to 205 before it even finished homing. It still begins to return to job at nozzle temp of 180 and feeds filament. Same crash occurred then too.

Snapmaker Firmware is Snapmaker2_V1.10.1_20200822

Cant upload any attachments of log because new user. Pasting exceeds character limit by 60k, so ill try and just add what looks like the last attempt, and removing the multiple lines of “Waiting for HMI”

1609809127917,2021.01.05 01:12:07.917,INFO,SC-FW,SC req enclosure sta
1609809129437,2021.01.05 01:12:09.437,INFO,SC-FW,SC req enclosure sta
1609809182003,2021.01.05 01:13:02.003,INFO,SC-FW,SC get env: 4
1609809182004,2021.01.05 01:13:02.004,INFO,SC-FW,live z offset: 0.000
1609809182006,2021.01.05 01:13:02.006,INFO,SC-FW,SC req enclosure sta
1609809182184,2021.01.05 01:13:02.184,INFO,SC-FW,SC req START work
1609809182186,2021.01.05 01:13:02.186,INFO,SC-FW,SC req -> Sucess
1609809182300,2021.01.05 01:13:02.300,INFO,SC-FW,new E target temp: 205
1609809182317,2021.01.05 01:13:02.317,INFO,SC-FW,new B target temp: 70
1609809182332,2021.01.05 01:13:02.332,INFO,SC-FW,leveling OFF
1609809192782,2021.01.05 01:13:12.782,INFO,SC-FW,leveling ON
1609809192786,2021.01.05 01:13:12.786,INFO,SC-FW,Apply Z offset: 0.00
1609809198714,2021.01.05 01:13:18.714,INFO,SC-FW,new E target temp: 205
1609809302235,2021.01.05 01:15:02.235,INFO,SC-FW,SC req enclosure sta
1609809313407,2021.01.05 01:15:13.407,INFO,SC-FW,new B target temp: 70
1609809800982,2021.01.05 01:23:20.982,INFO,SC-FW,SC req STOP
1609809800986,2021.01.05 01:23:20.986,INFO,SC-FW,SC req -> Sucess
1609809800990,2021.01.05 01:23:20.990,INFO,SC-FW,new B target temp: 0
1609809800992,2021.01.05 01:23:20.992,INFO,SC-FW,new E target temp: 0
1609809800994,2021.01.05 01:23:20.994,INFO,SC-FW,QS recorded pos X: 0.000, Y: 0.000, Z: 0.000, E: 0.000
1609809800996,2021.01.05 01:23:20.996,INFO,SC-FW,QS at logical pos: X: 103.978, Y: 59.432, Z: 0.160, E: 31.874
1609809801000,2021.01.05 01:23:21.000,INFO,SC-FW,leveling OFF
1609809823236,2021.01.05 01:23:43.236,INFO,SC-FW,leveling ON
1609809823238,2021.01.05 01:23:43.238,INFO,SC-FW,Finish stop
1609809843201,2021.01.05 01:24:03.201,INFO,SC-FW,SC req auto level
1609809843204,2021.01.05 01:24:03.204,INFO,SC-FW,e temp: 155.90 / 0
1609809843207,2021.01.05 01:24:03.207,INFO,SC-FW,b temp: 66.51 / 0
1609809843210,2021.01.05 01:24:03.210,INFO,SC-FW,leveling OFF
1609809853650,2021.01.05 01:24:13.650,INFO,SC-FW,leveling ON
1609809853652,2021.01.05 01:24:13.652,INFO,SC-FW,Apply Z offset: 0.00
1609809853654,2021.01.05 01:24:13.654,INFO,SC-FW,leveling OFF
1609809853655,2021.01.05 01:24:13.655,INFO,SC-FW,leveling ON
1609809853657,2021.01.05 01:24:13.657,INFO,SC-FW,leveling OFF
1609809865285,2021.01.05 01:24:25.285,INFO,SC-FW,Probing No. 0
1609809865287,2021.01.05 01:24:25.287,INFO,SC-FW,Move to X: 29.00, Y: 8.85, Z: 15.00
1609809870868,2021.01.05 01:24:30.868,INFO,SC-FW,probed z: 6.78
1609809874331,2021.01.05 01:24:34.331,INFO,SC-FW,probed z: 6.82
1609809876772,2021.01.05 01:24:36.772,INFO,SC-FW,probed z: 6.82
1609809877473,2021.01.05 01:24:37.473,INFO,SC-FW,Probing No. 1
1609809877475,2021.01.05 01:24:37.475,INFO,SC-FW,Move to X: 97.00, Y: 8.85, Z: 11.82
1609809879497,2021.01.05 01:24:39.497,INFO,SC-FW,probed z: 6.80
1609809882986,2021.01.05 01:24:42.986,INFO,SC-FW,probed z: 6.84
1609809885433,2021.01.05 01:24:45.433,INFO,SC-FW,probed z: 6.84
1609809886134,2021.01.05 01:24:46.134,INFO,SC-FW,Probing No. 2
1609809886137,2021.01.05 01:24:46.137,INFO,SC-FW,Move to X: 165.00, Y: 8.85, Z: 11.84
1609809888154,2021.01.05 01:24:48.154,INFO,SC-FW,probed z: 6.82
1609809891643,2021.01.05 01:24:51.643,INFO,SC-FW,probed z: 6.86
1609809894092,2021.01.05 01:24:54.092,INFO,SC-FW,probed z: 6.86
1609809894788,2021.01.05 01:24:54.788,INFO,SC-FW,Probing No. 3
1609809894792,2021.01.05 01:24:54.792,INFO,SC-FW,Move to X: 233.00, Y: 8.85, Z: 11.86
1609809896836,2021.01.05 01:24:56.836,INFO,SC-FW,probed z: 6.72
1609809900294,2021.01.05 01:25:00.294,INFO,SC-FW,probed z: 6.76
1609809902742,2021.01.05 01:25:02.742,INFO,SC-FW,probed z: 6.76
1609809903439,2021.01.05 01:25:03.439,INFO,SC-FW,Probing No. 4
1609809903442,2021.01.05 01:25:03.442,INFO,SC-FW,Move to X: 301.00, Y: 8.85, Z: 11.76
1609809905477,2021.01.05 01:25:05.477,INFO,SC-FW,probed z: 6.67
1609809908925,2021.01.05 01:25:08.925,INFO,SC-FW,probed z: 6.71
1609809911359,2021.01.05 01:25:11.359,INFO,SC-FW,probed z: 6.72
1609809912067,2021.01.05 01:25:12.067,INFO,SC-FW,Probing No. 5
1609809912071,2021.01.05 01:25:12.071,INFO,SC-FW,Move to X: 301.00, Y: 84.85, Z: 11.72
1609809914158,2021.01.05 01:25:14.158,INFO,SC-FW,probed z: 6.73
1609809917635,2021.01.05 01:25:17.635,INFO,SC-FW,probed z: 6.76
1609809920079,2021.01.05 01:25:20.079,INFO,SC-FW,probed z: 6.76
1609809920783,2021.01.05 01:25:20.783,INFO,SC-FW,Probing No. 6
1609809920785,2021.01.05 01:25:20.785,INFO,SC-FW,Move to X: 301.00, Y: 160.85, Z: 11.76
1609809922881,2021.01.05 01:25:22.881,INFO,SC-FW,probed z: 6.76
1609809926329,2021.01.05 01:25:26.329,INFO,SC-FW,probed z: 6.80
1609809928760,2021.01.05 01:25:28.760,INFO,SC-FW,probed z: 6.81
1609809929458,2021.01.05 01:25:29.458,INFO,SC-FW,Probing No. 7
1609809929461,2021.01.05 01:25:29.461,INFO,SC-FW,Move to X: 301.00, Y: 236.85, Z: 11.81
1609809931595,2021.01.05 01:25:31.595,INFO,SC-FW,probed z: 6.64
1609809935070,2021.01.05 01:25:35.070,INFO,SC-FW,probed z: 6.67
1609809937472,2021.01.05 01:25:37.472,INFO,SC-FW,probed z: 6.69
1609809938175,2021.01.05 01:25:38.175,INFO,SC-FW,Probing No. 8
1609809938177,2021.01.05 01:25:38.177,INFO,SC-FW,Move to X: 301.00, Y: 312.85, Z: 11.69
1609809940301,2021.01.05 01:25:40.301,INFO,SC-FW,probed z: 6.55
1609809943773,2021.01.05 01:25:43.773,INFO,SC-FW,probed z: 6.59
1609809946182,2021.01.05 01:25:46.182,INFO,SC-FW,probed z: 6.61
1609809946890,2021.01.05 01:25:46.890,INFO,SC-FW,Probing No. 9
1609809946892,2021.01.05 01:25:46.892,INFO,SC-FW,Move to X: 233.00, Y: 312.85, Z: 11.61
1609809948920,2021.01.05 01:25:48.920,INFO,SC-FW,probed z: 6.50
1609809952388,2021.01.05 01:25:52.388,INFO,SC-FW,probed z: 6.54
1609809954766,2021.01.05 01:25:54.766,INFO,SC-FW,probed z: 6.57
1609809955465,2021.01.05 01:25:55.465,INFO,SC-FW,Probing No. 10
1609809955468,2021.01.05 01:25:55.468,INFO,SC-FW,Move to X: 165.00, Y: 312.85, Z: 11.57
1609809957475,2021.01.05 01:25:57.475,INFO,SC-FW,probed z: 6.62
1609809961013,2021.01.05 01:26:01.013,INFO,SC-FW,probed z: 6.62
1609809963455,2021.01.05 01:26:03.455,INFO,SC-FW,probed z: 6.63
1609809964165,2021.01.05 01:26:04.165,INFO,SC-FW,Probing No. 11
1609809964168,2021.01.05 01:26:04.168,INFO,SC-FW,Move to X: 97.00, Y: 312.85, Z: 11.63
1609809966215,2021.01.05 01:26:06.215,INFO,SC-FW,probed z: 6.42
1609809969634,2021.01.05 01:26:09.634,INFO,SC-FW,probed z: 6.48
1609809972076,2021.01.05 01:26:12.076,INFO,SC-FW,probed z: 6.49
1609809972783,2021.01.05 01:26:12.783,INFO,SC-FW,Probing No. 12
1609809972786,2021.01.05 01:26:12.786,INFO,SC-FW,Move to X: 29.00, Y: 312.85, Z: 11.49
1609809974822,2021.01.05 01:26:14.822,INFO,SC-FW,probed z: 6.34
1609809978272,2021.01.05 01:26:18.272,INFO,SC-FW,probed z: 6.38
1609809980714,2021.01.05 01:26:20.714,INFO,SC-FW,probed z: 6.38
1609809981415,2021.01.05 01:26:21.415,INFO,SC-FW,Probing No. 13
1609809981418,2021.01.05 01:26:21.418,INFO,SC-FW,Move to X: 29.00, Y: 236.85, Z: 11.38
1609809983495,2021.01.05 01:26:23.495,INFO,SC-FW,probed z: 6.49
1609809986945,2021.01.05 01:26:26.945,INFO,SC-FW,probed z: 6.54
1609809989348,2021.01.05 01:26:29.348,INFO,SC-FW,probed z: 6.56
1609809990054,2021.01.05 01:26:30.054,INFO,SC-FW,Probing No. 14
1609809990061,2021.01.05 01:26:30.061,INFO,SC-FW,Move to X: 29.00, Y: 160.85, Z: 11.56
1609809992119,2021.01.05 01:26:32.119,INFO,SC-FW,probed z: 6.72
1609809995587,2021.01.05 01:26:35.587,INFO,SC-FW,probed z: 6.75
1609809998024,2021.01.05 01:26:38.024,INFO,SC-FW,probed z: 6.75
1609809998731,2021.01.05 01:26:38.731,INFO,SC-FW,Probing No. 15
1609809998733,2021.01.05 01:26:38.733,INFO,SC-FW,Move to X: 29.00, Y: 84.85, Z: 11.75
1609810000809,2021.01.05 01:26:40.809,INFO,SC-FW,probed z: 6.82
1609810004293,2021.01.05 01:26:44.293,INFO,SC-FW,probed z: 6.86
1609810006795,2021.01.05 01:26:46.795,INFO,SC-FW,probed z: 6.84
1609810007510,2021.01.05 01:26:47.510,INFO,SC-FW,Probing No. 16
1609810007513,2021.01.05 01:26:47.513,INFO,SC-FW,Move to X: 97.00, Y: 84.85, Z: 11.84
1609810009504,2021.01.05 01:26:49.504,INFO,SC-FW,probed z: 6.88
1609810013007,2021.01.05 01:26:53.007,INFO,SC-FW,probed z: 6.90
1609810015395,2021.01.05 01:26:55.395,INFO,SC-FW,probed z: 6.93
1609810016094,2021.01.05 01:26:56.094,INFO,SC-FW,Probing No. 17
1609810016097,2021.01.05 01:26:56.097,INFO,SC-FW,Move to X: 165.00, Y: 84.85, Z: 11.93
1609810018115,2021.01.05 01:26:58.115,INFO,SC-FW,probed z: 6.91
1609810021519,2021.01.05 01:27:01.519,INFO,SC-FW,probed z: 6.98
1609810023972,2021.01.05 01:27:03.972,INFO,SC-FW,probed z: 6.98
1609810024670,2021.01.05 01:27:04.670,INFO,SC-FW,Probing No. 18
1609810024673,2021.01.05 01:27:04.673,INFO,SC-FW,Move to X: 233.00, Y: 84.85, Z: 11.98
1609810026702,2021.01.05 01:27:06.702,INFO,SC-FW,probed z: 6.91
1609810030178,2021.01.05 01:27:10.178,INFO,SC-FW,probed z: 6.94
1609810032608,2021.01.05 01:27:12.608,INFO,SC-FW,probed z: 6.95
1609810033325,2021.01.05 01:27:13.325,INFO,SC-FW,Probing No. 19
1609810033328,2021.01.05 01:27:13.328,INFO,SC-FW,Move to X: 233.00, Y: 160.85, Z: 11.95
1609810035432,2021.01.05 01:27:15.432,INFO,SC-FW,probed z: 6.86
1609810038894,2021.01.05 01:27:18.894,INFO,SC-FW,probed z: 6.89
1609810041332,2021.01.05 01:27:21.332,INFO,SC-FW,probed z: 6.89
1609810042030,2021.01.05 01:27:22.030,INFO,SC-FW,Probing No. 20
1609810042033,2021.01.05 01:27:22.033,INFO,SC-FW,Move to X: 233.00, Y: 236.85, Z: 11.90
1609810044161,2021.01.05 01:27:24.161,INFO,SC-FW,probed z: 6.75
1609810047624,2021.01.05 01:27:27.624,INFO,SC-FW,probed z: 6.80
1609810050072,2021.01.05 01:27:30.072,INFO,SC-FW,probed z: 6.80
1609810050772,2021.01.05 01:27:30.772,INFO,SC-FW,Probing No. 21
1609810050774,2021.01.05 01:27:30.774,INFO,SC-FW,Move to X: 165.00, Y: 236.85, Z: 11.80
1609810052800,2021.01.05 01:27:32.800,INFO,SC-FW,probed z: 6.75
1609810056232,2021.01.05 01:27:36.232,INFO,SC-FW,probed z: 6.82
1609810058715,2021.01.05 01:27:38.715,INFO,SC-FW,probed z: 6.80
1609810059422,2021.01.05 01:27:39.422,INFO,SC-FW,Probing No. 22
1609810059424,2021.01.05 01:27:39.424,INFO,SC-FW,Move to X: 97.00, Y: 236.85, Z: 11.80
1609810061452,2021.01.05 01:27:41.452,INFO,SC-FW,probed z: 6.71
1609810064945,2021.01.05 01:27:44.945,INFO,SC-FW,probed z: 6.73
1609810067408,2021.01.05 01:27:47.408,INFO,SC-FW,probed z: 6.72
1609810068116,2021.01.05 01:27:48.116,INFO,SC-FW,Probing No. 23
1609810068118,2021.01.05 01:27:48.118,INFO,SC-FW,Move to X: 97.00, Y: 160.85, Z: 11.73
1609810070189,2021.01.05 01:27:50.189,INFO,SC-FW,probed z: 6.82
1609810073668,2021.01.05 01:27:53.668,INFO,SC-FW,probed z: 6.85
1609810076121,2021.01.05 01:27:56.121,INFO,SC-FW,probed z: 6.85
1609810076821,2021.01.05 01:27:56.821,INFO,SC-FW,Probing No. 24
1609810076823,2021.01.05 01:27:56.823,INFO,SC-FW,Move to X: 165.00, Y: 160.85, Z: 11.85
1609810078843,2021.01.05 01:27:58.843,INFO,SC-FW,probed z: 6.83
1609810082335,2021.01.05 01:28:02.335,INFO,SC-FW,probed z: 6.86
1609810084784,2021.01.05 01:28:04.784,INFO,SC-FW,probed z: 6.86
1609810096377,2021.01.05 01:28:16.377,INFO,SC-FW,SC req Z offset: -0.05
-Repeated Lines-
1609810113637,2021.01.05 01:28:33.637,INFO,SC-FW,SC req Z offset: -0.05
1609810115368,2021.01.05 01:28:35.368,INFO,SC-FW,SC req save data of leveling
1609810115371,2021.01.05 01:28:35.371,INFO,SC-FW,nozzle height: 1.749
1609810115481,2021.01.05 01:28:35.481,INFO,SC-FW,new leveling data:
1609810115482,2021.01.05 01:28:35.482,INFO,SC-FW,6.07
1609810115483,2021.01.05 01:28:35.483,INFO,SC-FW,6.09
1609810115484,2021.01.05 01:28:35.484,INFO,SC-FW,6.11
1609810115485,2021.01.05 01:28:35.485,INFO,SC-FW,6.01
1609810115486,2021.01.05 01:28:35.486,INFO,SC-FW,5.97
1609810115487,2021.01.05 01:28:35.487,INFO,SC-FW,Empty/NULL log message
1609810115488,2021.01.05 01:28:35.488,INFO,SC-FW,6.10
1609810115498,2021.01.05 01:28:35.498,INFO,SC-FW,6.17
1609810115500,2021.01.05 01:28:35.500,INFO,SC-FW,6.23
1609810115503,2021.01.05 01:28:35.503,INFO,SC-FW,6.20
1609810115506,2021.01.05 01:28:35.506,INFO,SC-FW,6.02
1609810115509,2021.01.05 01:28:35.509,INFO,SC-FW,Empty/NULL log message
1609810115512,2021.01.05 01:28:35.512,INFO,SC-FW,6.00
1609810115514,2021.01.05 01:28:35.514,INFO,SC-FW,6.10
1609810115515,2021.01.05 01:28:35.515,INFO,SC-FW,6.11
1609810115517,2021.01.05 01:28:35.517,INFO,SC-FW,6.14
1609810115518,2021.01.05 01:28:35.518,INFO,SC-FW,6.06
1609810115520,2021.01.05 01:28:35.520,INFO,SC-FW,Empty/NULL log message
1609810115521,2021.01.05 01:28:35.521,INFO,SC-FW,5.80
1609810115523,2021.01.05 01:28:35.523,INFO,SC-FW,5.98
1609810115524,2021.01.05 01:28:35.524,INFO,SC-FW,6.06
1609810115525,2021.01.05 01:28:35.525,INFO,SC-FW,6.05
1609810115527,2021.01.05 01:28:35.527,INFO,SC-FW,5.93
1609810115528,2021.01.05 01:28:35.528,INFO,SC-FW,Empty/NULL log message
1609810115534,2021.01.05 01:28:35.534,INFO,SC-FW,5.63
1609810115535,2021.01.05 01:28:35.535,INFO,SC-FW,5.74
1609810115536,2021.01.05 01:28:35.536,INFO,SC-FW,5.88
1609810115537,2021.01.05 01:28:35.537,INFO,SC-FW,5.81
1609810115538,2021.01.05 01:28:35.538,INFO,SC-FW,5.85
1609810115539,2021.01.05 01:28:35.539,INFO,SC-FW,Empty/NULL log message
1609810115541,2021.01.05 01:28:35.541,INFO,SC-FW,leveling ON
1609810198822,2021.01.05 01:29:58.822,INFO,SC-FW,SC get env: 4
1609810198823,2021.01.05 01:29:58.823,INFO,SC-FW,live z offset: 0.000
1609810198824,2021.01.05 01:29:58.824,INFO,SC-FW,SC req enclosure sta
1609810198968,2021.01.05 01:29:58.968,INFO,SC-FW,SC req START work
1609810198970,2021.01.05 01:29:58.970,INFO,SC-FW,SC req -> Sucess
1609810199126,2021.01.05 01:29:59.126,INFO,SC-FW,new E target temp: 205
1609810199150,2021.01.05 01:29:59.150,INFO,SC-FW,waiting HMI command, current line: 30
1609810199152,2021.01.05 01:29:59.152,INFO,SC-FW,new B target temp: 70
1609810199172,2021.01.05 01:29:59.172,INFO,SC-FW,leveling OFF
1609810210271,2021.01.05 01:30:10.271,INFO,SC-FW,SC req enclosure sta
1609810235712,2021.01.05 01:30:35.712,INFO,SC-FW,leveling ON
1609810235714,2021.01.05 01:30:35.714,INFO,SC-FW,Apply Z offset: 0.00
1609810241650,2021.01.05 01:30:41.650,INFO,SC-FW,new E target temp: 205
1609810318947,2021.01.05 01:31:58.947,INFO,SC-FW,new B target temp: 70
1609812901758,2021.01.05 02:15:01.758,INFO,SC-FW,new E target temp: 205
1609812907897,2021.01.05 02:15:07.897,INFO,SC-FW,new B target temp: 50
1609910116142,2021.01.06 05:15:16.142,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609910139553,2021.01.06 05:15:39.553,INFO,SC-FW,waiting HMI command, current line: 1179719
1609915738192,2021.01.06 06:48:58.192,INFO,SC-FW,success to create marlin task!
1609915738257,2021.01.06 06:48:58.257,INFO,SC-FW,SC req Exception
1609915738260,2021.01.06 06:48:58.260,INFO,SC-FW,SC req enclosure sta
1609915744872,2021.01.06 06:49:04.872,INFO,SC-FW,SC get env: 4
1609915744876,2021.01.06 06:49:04.876,INFO,SC-FW,live z offset: 0.000
1609915744881,2021.01.06 06:49:04.881,INFO,SC-FW,SC get env: 0
1609915744883,2021.01.06 06:49:04.883,INFO,SC-FW,feedrate_percentage: 100
1609915744889,2021.01.06 06:49:04.889,INFO,SC-FW,SC req enclosure sta
1609915744898,2021.01.06 06:49:04.898,INFO,SC-FW,SC req last line: 1179719
1609915751153,2021.01.06 06:49:11.153,INFO,SC-FW,SC trigger restore from power-loss
1609915751156,2021.01.06 06:49:11.156,INFO,SC-FW,restore point: X:300.42, Y: 172.54, Z: 5.52, E: 202.36)
1609915751158,2021.01.06 06:49:11.158,INFO,SC-FW,previous target temp: hotend: 205, bed: 50
1609915751162,2021.01.06 06:49:11.162,INFO,SC-FW,new B target temp: 50
1609915751166,2021.01.06 06:49:11.166,INFO,SC-FW,new E target temp: 205
1609915751168,2021.01.06 06:49:11.168,INFO,SC-FW,leveling OFF
1609915759378,2021.01.06 06:49:19.378,INFO,SC-FW,SC req enclosure sta
1609915761155,2021.01.06 06:49:21.155,INFO,SC-FW,SC req enclosure sta
1609915761302,2021.01.06 06:49:21.302,ERROR,SC-FW,heating failed for hotend, please check heating module & sensor! temp: 175.30 / 205
1609915761307,2021.01.06 06:49:21.307,INFO,SC-FW,new E target temp: 0
1609915761312,2021.01.06 06:49:21.312,ERROR,SC-FW,cannot stop in current status[6]
1609915803894,2021.01.06 06:50:03.894,INFO,SC-FW,leveling ON
1609915803897,2021.01.06 06:50:03.897,INFO,SC-FW,Apply Z offset: 0.00
1609915803899,2021.01.06 06:50:03.899,INFO,SC-FW,position shift:
1609915803904,2021.01.06 06:50:03.904,INFO,SC-FW,X: 0.00, Y: 0.00, Z: 0.00
1609915822445,2021.01.06 06:50:22.445,INFO,SC-FW,trigger RESTORE: ok
1609915822493,2021.01.06 06:50:22.493,INFO,SC-FW,SC req clear power loss bits
1609915822499,2021.01.06 06:50:22.499,INFO,SC-FW,will clear except: host: 9, type: 5
1609915822502,2021.01.06 06:50:22.502,INFO,SC-FW,power-loss fault is cleared!
1609915822503,2021.01.06 06:50:22.503,INFO,SC-FW,mask flash data ...
1609915822504,2021.01.06 06:50:22.504,INFO,SC-FW,Done!
1609915822507,2021.01.06 06:50:22.507,INFO,SC-FW,got 1rst cmd after resume
1609915822508,2021.01.06 06:50:22.508,INFO,SC-FW,cmd: G1 X281.422 Y162.535 E202.38651
1609915823275,2021.01.06 06:50:23.275,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609915834273,2021.01.06 06:50:34.273,INFO,SC-FW,waiting HMI command, current line: 1179719
1609915835170,2021.01.06 06:50:35.170,INFO,SC-FW,SC req Exception
1609915835173,2021.01.06 06:50:35.173,INFO,SC-FW,SC req enclosure sta
1609915836185,2021.01.06 06:50:36.185,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609915848176,2021.01.06 06:50:48.176,INFO,SC-FW,waiting HMI command, current line: 1179719
                                                                                                                                                                                                                                                                                    1609915892940,2021.01.06 06:51:32.940,INFO,SC-FW,success to create marlin task!
1609915892967,2021.01.06 06:51:32.967,INFO,SC-FW,SC req Exception
1609915892973,2021.01.06 06:51:32.973,INFO,SC-FW,SC req enclosure sta
1609915898064,2021.01.06 06:51:38.064,INFO,SC-FW,SC get env: 4
1609915898066,2021.01.06 06:51:38.066,INFO,SC-FW,live z offset: 0.000
1609915898068,2021.01.06 06:51:38.068,INFO,SC-FW,SC get env: 0
1609915898071,2021.01.06 06:51:38.071,INFO,SC-FW,feedrate_percentage: 100
1609915898074,2021.01.06 06:51:38.074,INFO,SC-FW,SC req enclosure sta
1609915898079,2021.01.06 06:51:38.079,INFO,SC-FW,SC req last line: 1179719
1609915904394,2021.01.06 06:51:44.394,INFO,SC-FW,SC trigger restore from power-loss
1609915904396,2021.01.06 06:51:44.396,INFO,SC-FW,restore point: X:300.42, Y: 172.54, Z: 5.52, E: 202.36)
1609915904398,2021.01.06 06:51:44.398,INFO,SC-FW,previous target temp: hotend: 0, bed: 50
1609915904401,2021.01.06 06:51:44.401,INFO,SC-FW,new B target temp: 50
1609915904402,2021.01.06 06:51:44.402,INFO,SC-FW,new E target temp: 180
1609915907149,2021.01.06 06:51:47.149,INFO,SC-FW,SC req enclosure sta
1609915941534,2021.01.06 06:52:21.534,INFO,SC-FW,leveling OFF
1609915994225,2021.01.06 06:53:14.225,INFO,SC-FW,leveling ON
1609915994228,2021.01.06 06:53:14.228,INFO,SC-FW,Apply Z offset: 0.00
1609915994230,2021.01.06 06:53:14.230,INFO,SC-FW,position shift:
1609915994235,2021.01.06 06:53:14.235,INFO,SC-FW,X: 0.00, Y: 0.00, Z: 0.00
1609916024704,2021.01.06 06:53:44.704,INFO,SC-FW,trigger RESTORE: ok
1609916024751,2021.01.06 06:53:44.751,INFO,SC-FW,SC req clear power loss bits
1609916024753,2021.01.06 06:53:44.753,INFO,SC-FW,will clear except: host: 9, type: 5
1609916024755,2021.01.06 06:53:44.755,INFO,SC-FW,power-loss fault is cleared!
1609916024756,2021.01.06 06:53:44.756,INFO,SC-FW,mask flash data ...
1609916024757,2021.01.06 06:53:44.757,INFO,SC-FW,Done!
1609916026165,2021.01.06 06:53:46.165,INFO,SC-FW,got 1rst cmd after resume
1609916026167,2021.01.06 06:53:46.167,INFO,SC-FW,cmd: G1 X281.422 Y162.535 E202.38651
1609916027213,2021.01.06 06:53:47.213,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609916050459,2021.01.06 06:54:10.459,INFO,SC-FW,waiting HMI command, current line: 1179719
1609916051596,2021.01.06 06:54:11.596,INFO,SC-FW,SC req Exception
1609916051599,2021.01.06 06:54:11.599,INFO,SC-FW,SC req enclosure sta
1609916052605,2021.01.06 06:54:12.605,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609916231590,2021.01.06 06:57:11.590,INFO,SC-FW,waiting HMI command, current line: 1179719
36797,1970.01.01 00:00:36.797,INFO,SC-FW,success to create marlin task!
36842,1970.01.01 00:00:36.842,INFO,SC-FW,SC req Exception
36852,1970.01.01 00:00:36.852,INFO,SC-FW,SC req enclosure sta
42355,1970.01.01 00:00:42.355,INFO,SC-FW,SC get env: 4
42358,1970.01.01 00:00:42.358,INFO,SC-FW,live z offset: 0.000
42360,1970.01.01 00:00:42.360,INFO,SC-FW,SC get env: 0
42361,1970.01.01 00:00:42.361,INFO,SC-FW,feedrate_percentage: 100
42364,1970.01.01 00:00:42.364,INFO,SC-FW,SC req enclosure sta
42380,1970.01.01 00:00:42.380,INFO,SC-FW,SC req last line: 1179719
1609916298399,2021.01.06 06:58:18.399,INFO,SC-FW,SC trigger restore from power-loss
1609916298400,2021.01.06 06:58:18.400,INFO,SC-FW,restore point: X:300.42, Y: 172.54, Z: 5.52, E: 202.38)
1609916298401,2021.01.06 06:58:18.401,INFO,SC-FW,previous target temp: hotend: 180, bed: 50
1609916298408,2021.01.06 06:58:18.408,INFO,SC-FW,new B target temp: 50
1609916298409,2021.01.06 06:58:18.409,INFO,SC-FW,new E target temp: 180
1609916298411,2021.01.06 06:58:18.411,INFO,SC-FW,leveling OFF
1609916351086,2021.01.06 06:59:11.086,INFO,SC-FW,leveling ON
1609916351092,2021.01.06 06:59:11.092,INFO,SC-FW,Apply Z offset: 0.00
1609916351098,2021.01.06 06:59:11.098,INFO,SC-FW,position shift:
1609916351100,2021.01.06 06:59:11.100,INFO,SC-FW,X: 0.00, Y: 0.00, Z: 0.00
1609916392760,2021.01.06 06:59:52.760,INFO,SC-FW,trigger RESTORE: ok
1609916392807,2021.01.06 06:59:52.807,INFO,SC-FW,SC req clear power loss bits
1609916392812,2021.01.06 06:59:52.812,INFO,SC-FW,will clear except: host: 9, type: 5
1609916392816,2021.01.06 06:59:52.816,INFO,SC-FW,power-loss fault is cleared!
1609916392817,2021.01.06 06:59:52.817,INFO,SC-FW,mask flash data ...
1609916392818,2021.01.06 06:59:52.818,INFO,SC-FW,Done!
1609916394229,2021.01.06 06:59:54.229,INFO,SC-FW,got 1rst cmd after resume
1609916394231,2021.01.06 06:59:54.231,INFO,SC-FW,cmd: G1 X281.422 Y162.535 E202.38651
1609916394247,2021.01.06 06:59:54.247,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609916404247,2021.01.06 07:00:04.247,INFO,SC-FW,waiting HMI command, current line: 1179719
1609916405963,2021.01.06 07:00:05.963,INFO,SC-FW,SC req Exception
1609916405966,2021.01.06 07:00:05.966,INFO,SC-FW,SC req enclosure sta
1609916406956,2021.01.06 07:00:06.956,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609916452954,2021.01.06 07:00:52.954,INFO,SC-FW,waiting HMI command, current line: 1179719
1609916495362,2021.01.06 07:01:35.362,INFO,SC-FW,SC req Exception
1609916495366,2021.01.06 07:01:35.366,INFO,SC-FW,SC req enclosure sta
1609916585890,2021.01.06 07:03:05.890,INFO,SC-FW,SC get env: 4
1609916585895,2021.01.06 07:03:05.895,INFO,SC-FW,live z offset: 0.000
1609916585898,2021.01.06 07:03:05.898,INFO,SC-FW,SC get env: 0
1609916585901,2021.01.06 07:03:05.901,INFO,SC-FW,feedrate_percentage: 100
1609916585904,2021.01.06 07:03:05.904,INFO,SC-FW,SC req enclosure sta
1609916585926,2021.01.06 07:03:05.926,INFO,SC-FW,SC req last line: 1179719
1609916592192,2021.01.06 07:03:12.192,INFO,SC-FW,SC trigger restore from power-loss
1609916592194,2021.01.06 07:03:12.194,INFO,SC-FW,restore point: X:300.42, Y: 172.54, Z: 5.52, E: 202.38)
1609916592197,2021.01.06 07:03:12.197,INFO,SC-FW,previous target temp: hotend: 180, bed: 50
1609916592201,2021.01.06 07:03:12.201,INFO,SC-FW,new B target temp: 50
1609916592202,2021.01.06 07:03:12.202,INFO,SC-FW,new E target temp: 180
1609916616184,2021.01.06 07:03:36.184,INFO,SC-FW,leveling OFF
1609916668841,2021.01.06 07:04:28.841,INFO,SC-FW,leveling ON
1609916668844,2021.01.06 07:04:28.844,INFO,SC-FW,Apply Z offset: 0.00
1609916668846,2021.01.06 07:04:28.846,INFO,SC-FW,position shift:
1609916668850,2021.01.06 07:04:28.850,INFO,SC-FW,X: 0.00, Y: 0.00, Z: 0.00
1609916699353,2021.01.06 07:04:59.353,INFO,SC-FW,trigger RESTORE: ok
1609916699392,2021.01.06 07:04:59.392,INFO,SC-FW,SC req clear power loss bits
1609916699394,2021.01.06 07:04:59.394,INFO,SC-FW,will clear except: host: 9, type: 5
1609916699396,2021.01.06 07:04:59.396,INFO,SC-FW,power-loss fault is cleared!
1609916699401,2021.01.06 07:04:59.401,INFO,SC-FW,mask flash data ...
1609916699403,2021.01.06 07:04:59.403,INFO,SC-FW,Done!
1609916700815,2021.01.06 07:05:00.815,INFO,SC-FW,got 1rst cmd after resume
1609916700818,2021.01.06 07:05:00.818,INFO,SC-FW,cmd: G1 X281.422 Y162.535 E202.38651
1609916700831,2021.01.06 07:05:00.831,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609916725813,2021.01.06 07:05:25.813,INFO,SC-FW,waiting HMI command, current line: 1179719
1609916729090,2021.01.06 07:05:29.090,INFO,SC-FW,SC req Exception
1609916729093,2021.01.06 07:05:29.093,INFO,SC-FW,SC req enclosure sta
1609916730095,2021.01.06 07:05:30.095,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609917015084,2021.01.06 07:10:15.084,INFO,SC-FW,waiting HMI command, current line: 1179719
1609917015123,2021.01.06 07:10:15.123,INFO,SC-FW,SC req enclosure sta
1609917016088,2021.01.06 07:10:16.088,INFO,SC-FW,waiting HMI command, current line: 1179719
1609917017029,2021.01.06 07:10:17.029,INFO,SC-FW,SC req enclosure sta
1609917017092,2021.01.06 07:10:17.092,INFO,SC-FW,waiting HMI command, current line: 1179719
1609917017497,2021.01.06 07:10:17.497,INFO,SC-FW,SC req enclosure sta
1609917018088,2021.01.06 07:10:18.088,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609917024093,2021.01.06 07:10:24.093,INFO,SC-FW,waiting HMI command, current line: 1179719
1609917024542,2021.01.06 07:10:24.542,INFO,SC-FW,new E target temp: 0
1609917024559,2021.01.06 07:10:24.559,INFO,SC-FW,new B target temp: 0
37609,1970.01.01 00:00:37.609,INFO,SC-FW,success to create marlin task!
37649,1970.01.01 00:00:37.649,INFO,SC-FW,SC req Exception
37652,1970.01.01 00:00:37.652,INFO,SC-FW,SC req enclosure sta
41678,1970.01.01 00:00:41.678,INFO,SC-FW,SC get env: 4
41682,1970.01.01 00:00:41.682,INFO,SC-FW,live z offset: 0.000
41695,1970.01.01 00:00:41.695,INFO,SC-FW,SC get env: 0
41697,1970.01.01 00:00:41.697,INFO,SC-FW,feedrate_percentage: 100
41699,1970.01.01 00:00:41.699,INFO,SC-FW,SC req enclosure sta
41703,1970.01.01 00:00:41.703,INFO,SC-FW,SC req last line: 1179719
37005,1970.01.01 00:00:37.005,INFO,SC-FW,success to create marlin task!
37007,1970.01.01 00:00:37.007,INFO,SC-FW,success to create HMI task!
37010,1970.01.01 00:00:37.010,INFO,SC-FW,success to create heartbeat task!
37012,1970.01.01 00:00:37.012,INFO,SC-FW,Screen Plugged!
37040,1970.01.01 00:00:37.040,INFO,SC-FW,SC req Exception
37043,1970.01.01 00:00:37.043,INFO,SC-FW,SC req enclosure sta
1609917969584,2021.01.06 07:26:09.584,INFO,SC-FW,SC get env: 4
1609917969588,2021.01.06 07:26:09.588,INFO,SC-FW,live z offset: 0.000
1609917969591,2021.01.06 07:26:09.591,INFO,SC-FW,SC get env: 0
1609917969592,2021.01.06 07:26:09.592,INFO,SC-FW,feedrate_percentage: 100
1609917969594,2021.01.06 07:26:09.594,INFO,SC-FW,SC req enclosure sta
1609917969828,2021.01.06 07:26:09.828,INFO,SC-FW,SC req last line: 1179719
1609917979456,2021.01.06 07:26:19.456,INFO,SC-FW,SC req Exception
1609917979458,2021.01.06 07:26:19.458,INFO,SC-FW,SC req enclosure sta
1609918053214,2021.01.06 07:27:33.214,INFO,SC-FW,SC req enclosure sta
1609918054021,2021.01.06 07:27:34.021,INFO,SC-FW,SC req enclosure sta
1609918061307,2021.01.06 07:27:41.307,INFO,SC-FW,SC req enclosure sta
36702,1970.01.01 00:00:36.702,INFO,SC-FW,success to create marlin task!
36730,1970.01.01 00:00:36.730,INFO,SC-FW,SC req Exception
36735,1970.01.01 00:00:36.735,INFO,SC-FW,SC req enclosure sta
1609918161958,2021.01.06 07:29:21.958,INFO,SC-FW,SC get env: 4
1609918161959,2021.01.06 07:29:21.959,INFO,SC-FW,live z offset: 0.000
1609918161961,2021.01.06 07:29:21.961,INFO,SC-FW,SC get env: 0
1609918161965,2021.01.06 07:29:21.965,INFO,SC-FW,feedrate_percentage: 100
1609918161968,2021.01.06 07:29:21.968,INFO,SC-FW,SC req enclosure sta
1609918162004,2021.01.06 07:29:22.004,INFO,SC-FW,SC req last line: 1179719
1609918168260,2021.01.06 07:29:28.260,INFO,SC-FW,SC trigger restore from power-loss
1609918168264,2021.01.06 07:29:28.264,INFO,SC-FW,restore point: X:300.42, Y: 172.54, Z: 5.52, E: 202.38)
1609918168267,2021.01.06 07:29:28.267,INFO,SC-FW,previous target temp: hotend: 0, bed: 0
1609918168268,2021.01.06 07:29:28.268,INFO,SC-FW,new B target temp: 0
1609918168271,2021.01.06 07:29:28.271,INFO,SC-FW,new E target temp: 180
1609918188465,2021.01.06 07:29:48.465,INFO,SC-FW,SC req enclosure sta
1609918219375,2021.01.06 07:30:19.375,INFO,SC-FW,leveling OFF
1609918271967,2021.01.06 07:31:11.967,INFO,SC-FW,leveling ON
1609918271969,2021.01.06 07:31:11.969,INFO,SC-FW,Apply Z offset: 0.00
1609918271974,2021.01.06 07:31:11.974,INFO,SC-FW,position shift:
1609918271977,2021.01.06 07:31:11.977,INFO,SC-FW,X: 0.00, Y: 0.00, Z: 0.00
1609918303028,2021.01.06 07:31:43.028,INFO,SC-FW,trigger RESTORE: ok
1609918303071,2021.01.06 07:31:43.071,INFO,SC-FW,SC req clear power loss bits
1609918303073,2021.01.06 07:31:43.073,INFO,SC-FW,will clear except: host: 9, type: 5
1609918303075,2021.01.06 07:31:43.075,INFO,SC-FW,power-loss fault is cleared!
1609918303076,2021.01.06 07:31:43.076,INFO,SC-FW,mask flash data ...
1609918303078,2021.01.06 07:31:43.078,INFO,SC-FW,Done!
1609918303094,2021.01.06 07:31:43.094,INFO,SC-FW,new hotend temp: 205.00
1609918303095,2021.01.06 07:31:43.095,INFO,SC-FW,new E target temp: 205
1609918303111,2021.01.06 07:31:43.111,INFO,SC-FW,new bed temp: 50.00
1609918303113,2021.01.06 07:31:43.113,INFO,SC-FW,new B target temp: 50
1609918304555,2021.01.06 07:31:44.555,INFO,SC-FW,got 1rst cmd after resume
1609918304557,2021.01.06 07:31:44.557,INFO,SC-FW,cmd: G1 X281.422 Y162.535 E202.38651
1609918305274,2021.01.06 07:31:45.274,INFO,SC-FW,waiting HMI command, current line: 1179719
-Repeated Lines-
1609918313277,2021.01.06 07:31:53.277,INFO,SC-FW,waiting HMI command, current line: 1179719
1609918314293,2021.01.06 07:31:54.293,INFO,SC-FW,SC req Exception
1609918314296,2021.01.06 07:31:54.296,INFO,SC-FW,SC req enclosure sta

It would be easier to read if you write 3 backticks before and after your log ```

Unfortunately I think your touchscreen is broken.
There is a thread in the forum about a loose solder point of the cable in the touchscreen and a sharp edge which easily could slice this cable.

You have to write your issue to support@snapmaker.com

Thanks ill try that. In the meantime, if anyone else knows anything…? :smiley:

Can you comment on the location in the logs (date and time) it occured. If it’s the newest events (1-6 7:31AM), can you offer a possible explanation for the power loss comments in the log?

It seems every time the machine has started, recently, it’s trying to resume from a power loss event.

If that sounds in error to you, maybe the best option is to contact support and see if there’s a way to reset the controller, maybe something is stuck in error in the memory.

I hope you dont have to deal with replacing your screen as suggested may be the case,

it seems that 1.10 is a bit unstable for some people (i think i discovered some bugginess on it a couple days ago).

I wonder if maybe you tried to roll back to 1.9 if it would have any postive impact for you. rumor has it that it is the most stable version

@brent113, that was me cycling the power to try to get it to resume the print using the power loss function, which it would start to try doing after it powered back up, but the same error that caused it to stop in the first place just happened every time it got to the resume point

@MooseJuice ill try rolling back to 1.9. I just really didnt want to lose the print progess. oh well i guess