Strangest thing.Luban 4.9.0 Firmware 2.5.16. New machine. I tried to print the test pattern (compass, square) but the square outline cut failed. The compass cut fine, but when it got to the outline cut for the right square the laser didn’t power on even though the control unit said it should be at 1…

It’s seems like it’s all related to the update, please fill out the ticket Support Ticket Form

Having exactly the same issue. Tried deleting all other paths and re-running the ruler outline… the laser happily passed around the perimeter displaying 100% power while shut off.

[image] Fishstyx: Luban 4.9.0 Firmware 2.5.16 I reverted Luban to 4.8.2, kept the new firmware (which apparently has working inline power control) and now it works properly. I just cut a variety of squared and curved shaped, then etched grayscale imaged into basswood using both line-fill and …

Hi @Fishstyx , Thanks for the report. We have detected this issue and fix this soon in the next firmware update. @nweolu Thanks for drawing my attention here too. :smiling_face:

Hi all, thank you for pointing out the problems. Please check out the update on Luban V4.9.0 issues here: [image] Luban V4.9.0 Known Issues & Solutions Snapmaker Luban Hi Makers, We’re collecting the issues you’ve encountered when using Luban V4.9.0 and trying…

10w Laser Won't Power On for Shapes Without Curves

Artisan (3-in-1)

Jade September 25, 2023, 12:41pm 6

Hi all, thank you for pointing out the problems. Please check out the update on Luban V4.9.0 issues here:

Topic		Replies	Views
Luban 4.9.0 Laser no longer works Snapmaker Luban	13	1334	September 26, 2023
Luban V4.9.0 Known Issues & Solutions Snapmaker Luban	47	3826	December 1, 2023
Luban 4.0.0 won't turn the laser to 100% Snapmaker Luban	15	1867	July 11, 2022
Laser cutting - Laser didn´t shut off between objects Snapmaker 2.0 (3-in-1)	3	368	December 9, 2023
Beware Luban 4.9.0 + Stock 2.0 Firmware Snapmaker 2.0 (3-in-1)	2	609	September 22, 2023

10w Laser Won't Power On for Shapes Without Curves

Related topics