Smooth Timelapse Mode with Fixed Printhead Position

[Fat_cat]

[Open-Source Engineering Preview] ESP32 Timelapse Box: External-Camera Smooth Timelapse for U1 and Klipper

[DSC00371_under10MB] After quite a bit of development and testing, I have released the first version of the ESP32 Timelapse Box. The goal is to let a Snapmaker U1 or another Klipper printer control an external camera for layer-by-layer timelapse photography, without requiring a PC-side listener during the print. The complete workflow has now been tested with a Snapmaker U1, ESP32-S3, and Sony ZV-E10. How It Works SnapOrca generates a capture command for each layer → Klipper runs the ESP_TI…