I’ve been working on the problems with SM2’s bed leveling issues for a while now. I’ve created some Google Sheets that can help with the process. The “Introduction” page will give some background. If you have any problems at all, please ask. I’m open to any feedback or suggestions. With the link be…

The luban terminal lol You can copy out of it but it sucks at it I have to both use the edit menu pulldown and copy, then control c if i do one or the other it doesnt work Has to be both

Hmm. I know the copy & paste in Luban use to NOT work but I believe they did fix it. I don’t know that you can paste INTO it but you should be able to copy from it and paste elsewhere. AND are you talking about a USB connection and not WiFi?

It works, but it doesnt work well (for me). I have to do it multiple times and use both the pull down and control c. yes via usb. I guess i could try the pre-release version from the forum on my laptop i have connected to it. i am using the version before that there. not that it particularly matt…

Anecdotal evidence is all I can offer, but I’ve never had an issue copying using ctrl+c

My evening was a real leveling nigthmare… The results of a pre-heated auto leveling with 5x5 was not better then 3x3. Then I tried manual leveling with 5x5 and even then got places where the filament was not sticking at all and others where the bed was slightly scrached. After 8 corrections with you…

Here’s what I was told by support. Your mileage may vary, and it doesn’t hurt to email them. [image] Bed is not level Snapmaker 2.0 I’ll just pass along what Edwin told me. But the tolerance of the webbed carriage, not the build platform, is 0.15mm, see below for the full …

Glass bed is what i am getting ready to try soon waiting on it to come in now. to print directly on the glass that will necessitate needing manual calibration unless you do some kind of mod There are so many posts on the forum about people’s efforts to make it better I need to go around and gather …

Last weekend I already thought about the screws maybe building up a tension to the heating plate. I have loosened all screws, heated up the bed and tightened them back only slightly. Before the next leveling attempt I will have a look at the screw thing again. BTW what bed holder is the better one…

[image] digitalfreak: The more square shaped or the one with the “spikes” around the square? ?? This is not familiar to me.

Sorry I don’t have the picture anymore I only remember. It was only a smal card that statet not to bother if the picture of the platform shown in the manual is a different one. So you also have the one with the spikes? The other one was more like a full frame where as far as I remember all outer nut…

SM2 Bed Leveling 101

Snapmaker 2.0 (3-in-1)

brent113 January 5, 2021, 11:58pm 63

Here’s what I was told by support. Your mileage may vary, and it doesn’t hurt to email them.

Topic		Replies	Views
On achieving a better leveling (With help from Snapmaker Devs) Snapmaker 2.0 (3-in-1)	41	4696	September 3, 2024
On achieving a perfect level Snapmaker 2.0 (3-in-1)	269	19170	March 3, 2023
SM2 Bed Leveling Snapmaker 2.0 (3-in-1)	91	10891	January 6, 2021
Bed Leveling - Revisited & Detailed Snapmaker 2.0 (3-in-1)	34	9437	July 29, 2024
Is automatic level compensation working properly? Snapmaker 2.0 (3-in-1)	36	3082	April 8, 2022

SM2 Bed Leveling 101

Related topics