I have setup S3d as previous posts suggested to run with SM 2. Seems to be working except when a print reaches 99% complete, the printer just stops. The bed and nozzle turn off. The X,Y,Z axis’ do not move (nor home). The screen freezes and the only way to clear this out is to shut the printer off, …

Do you have the issue every time? If so, delete all commentary of your end gcode and try again. Unfortunately this is a known bug at the last two firmware versions 1.10 and 1.10.1 that prints stop at 99%.

Yes, it happens every time. I will try removing all comment. If that does not work, I will update the firmware. Thank you for your quick response. I REALLY appreciate that.

Just wanted to update you if any one else has this issue. I deleted all the comment from the ending script and it now works as it should. Thank you for your advise.

Simplfy3D setting with SM2

Snapmaker 2.0 (3-in-1)

ElloryJaye September 21, 2020, 7:01pm 2

Sounds like a known bug in firmware 1.10.0 (see Printing just stoped ). Try upgrading to 1.10.1 or downgrading to 1.9.

Topic		Replies	Views
After interrupting printing, the error occurs on reprinting Snapmaker 2.0 (3-in-1)	4	264	November 11, 2020
Printing just stoped Snapmaker 2.0 (3-in-1)	55	5228	August 17, 2022
99% error when using Simplify3d Snapmaker 2.0 (3-in-1)	4	1144	November 22, 2020
Print head position at the finish of the print Original (3-in-1)	2	527	April 27, 2020
Print just stopped + more Original (3-in-1)	39	4094	August 13, 2020

Simplfy3D setting with SM2

Related topics