Can anyone say me how high the electricity cost are per hour for 3D Printing?

[image] Somnium: so its about 290 W/h that makes 3 hours are rounded 1kW/H It would be less than 290W on average for 3D printing as the bed is not on continuously. I’d wager a 24 hour usage of under 5kWh. In my parts of the world that’s about $0.75/day of continuous usage. The largest porti…

[image] Snapmaker 2.0 A350 Power Supply Requirements Snapmaker 2.0 @detlefgrohs Here are some pictures from the inside and the power usage of my A350. Power Usage, Printing-Module: Startup 50W Idle 46,3W Idle with Enclosure-Light on 53W Idle with Enclosure-Fan on 52W…

thanks for the fast Reply. so its about 290 W/h that makes 3 hours are rounded 1kW/H?

Thats the absolute maximum which is just reached in preheat. Don´t forget about, it is the biggest machine available now, the A350.

thats good bc I have a A350 I should have mentioned that in the post sry for that

ah ok I tought that laser would also need a lot and nice to know

It’s a 1.6W laser, and diode lasers are pretty efficient, probably better than 50%. So 3W vs 300W for the bed heater.

Power Supply Costs A350

Snapmaker 2.0 (3-in-1)

xchrisd January 6, 2021, 11:13am 2

Maximum power consumption is about 290Watt.

Topic		Replies	Views
Power Consumption of Snapmaker 2.0 Official Articles	2	5713	May 3, 2021
Power consumption of the power module Snapmaker 2.0 (3-in-1)	1	957	October 18, 2021
Snapmaker 2.0 A350 Power Supply Requirements Snapmaker 2.0 (3-in-1)	17	6591	June 2, 2021
A350 heat bed mod Snapmaker 2.0 (3-in-1)	32	5943	June 22, 2025
Power requirements Original (3-in-1)	13	3432	May 24, 2018

Power Supply Costs A350

Related topics