Can anyone say me how high the electricity cost are per hour for 3D Printing?
Maximum power consumption is about 290Watt.
1 Like
thanks for the fast Reply. so its about 290 W/h that makes 3 hours are rounded 1kW/H?
Thats the absolute maximum which is just reached in preheat.
Don´t forget about, it is the biggest machine available now, the A350.
thats good bc I have a A350 I should have mentioned that in the post sry for that
It would be less than 290W on average for 3D printing as the bed is not on continuously.
I’d wager a 24 hour usage of under 5kWh. In my parts of the world that’s about $0.75/day of continuous usage.
The largest portion of that load is the heated bed, by far. Laser and CNC will use less than half of that.
1 Like
ah ok I tought that laser would also need a lot and nice to know
It’s a 1.6W laser, and diode lasers are pretty efficient, probably better than 50%. So 3W vs 300W for the bed heater.
1 Like