Anyone else have the problem of latest update not working? Gcodes load but when I go to start my print the file doesn’t load to touch screen. I went back to 4.2.3 and everything works great.

I have noticed that the print times have nearly doubled since the new update. I had a print that was 26 hours now upto 41 hours, whats going on?

[image] MichaelS: don’t know why they changed it. Now the startup procedure goes some minutes longer then before… It wasn’t simply that the items would not print on my machines, they also gave vague error messages from one attempt to print and no error message on a different attempt with the…

We confirmed the problem. A machine configuration update caused bed heating and nozzle heating to not start at the same time when printing started, will fix it in v4.5.1.

Modify in the settings and modify 1.6W-> 10W again, if the Case Library shows that these cases are not successful. We found a display bug, but actually switched to 10w successfully [image]

The problem you have encountered seems to be more complicated. If you can please contact our support( support@snapmaker.com ) and provide more information.

I have a problem importing SVG files in Luban since the upgrade to 4.5.0. In the previous version, when I created an SVG in CorelDraw, Luban imported it just fine. In the new version, the dimensions are just wrong. In the following example svg, the dimensions of the polygon should be 5 x 10 mm. , an…

I guess I’m just gonna stick with the older version until they fix this.

I removed M105 and M109 S200 C5 W0 and I am able to print. But what are the meaning of C5 and W0 ? Also for M105 ? I do not found them in my papers.

I saw the additional lines also. This is a new set of instructions that seem not to be needed. What I found was to just wait and observe. The M140 command sets the bed temperature, and the M109 sets the nozzle temperature. Watching the display, I found that the bed temperature went to set point …

Luban update 4.5.0

Software Snapmaker Luban

MichaelS January 16, 2023, 8:45am 19

I saw the issue with unexpected movement during printing later. Not very nice!
But at the end I can go on until SM will fix these issues.

Topic		Replies	Views
Luban V4.5: Known Issues & Corresponding Solutions Snapmaker Luban Snapmaker_Luban	62	5776	October 5, 2024
Luban V4.9.0 Known Issues & Solutions Snapmaker Luban	48	3621	October 14, 2024
Snapmaker Luban v4.4.0 is Released Snapmaker Luban	41	5775	December 1, 2022
Luban 4.8.2 not working properly Snapmaker Luban	4	501	September 16, 2023
New settings are not holding Snapmaker 2.0 (3-in-1)	26	934	September 15, 2022

Luban update 4.5.0

Related topics