Hello ! What do you use to maintain your Snapmaker in good condition ? Do you add oil on axis ? Do you you use special grease for crews ? Where can i find official advises from snapmaker ? Does it exist ? … I’ve found absolutely nothing about that. Thank a lot for your advises… it’s my first 3d p…

Have you ever wondered what makes the Snapmaker 2.0 machines dust-proof? Do you know how well the linear modules protect your Snapmaker? To answer these questions, we conducted an ultimate test on the machine during the pilot production. Let’s check it out. Test Time: Over 50 hours Carving Materi…

i think the main concern is not dust getting into the components but rather a matter of it being a machine and moving parts rubbing on each other wears down the parts. i am sure that the snapmaker team has produced a great product and tested its functionality. from the perspective of a factory worke…

I will ask our mechanic engineer about those questions, and the answers will be posted here later.

and where should this be added? I am a newbie to all of this and would appreciate as specific as possible instructions. I am sure some people know exactly how to use this, however for those of us who are new to not only the 3d printing field but also the maintenance of such equipment, would you be k…

Hi Lorel, we are making a video per your suggestion. And I will post the video here once it is finished. The video will contain the information pertaining to your questions. Sorry for the late reply. You can also check out our YouTube channel for general tips and tricks. There are also many FAQs on…

Here is a video of applying the lubricant. [applying lubricant]

This video is very informative thank you!

all perfect (I was going to ask that question also because I saw black stripes on the steel bands) so I wondered if some lubrification is missing! now where can I buy that grease (am living Seville, Spain, Europe)? aditional question: would sawing machine oil (fine pure mineral oil)not do the same…

I was about to ask the same question about the lubricant. I’ve been looking for it on the internet but every site that comes up is either unrelated to lubricants or in some Asian language that I can not read. Is there a site y’all can recommend or an easier to find alternative? Cause I can’t even re…

How to maintain the snapmaker in perfect condition?

Snapmaker 2.0 (3-in-1)

Edwin May 8, 2020, 3:03am 5

NIKI FG-107M
According to our mechanic engineer, you can lubricate once a year

Linear rails maintenance and life span

Minimum operating temperature for Snapmaker Original?

Snapmaker 2.0 A350T lead screw greasing to reduce the squeaking noise in Y-axis movement

Topic		Replies	Views
Lubrication of the linear modules Original (3-in-1)	8	4951	July 28, 2019
Maintenance tips? Snapmaker 2.0 (3-in-1)	4	1313	July 13, 2021
A350 Service for linear moduls neccessary? Snapmaker 2.0 (3-in-1)	1	1152	December 22, 2020
Maintainance Support (squeaky noise) Snapmaker 2.0 (3-in-1)	2	417	October 15, 2023
Preventive Maintenance Showcases & Tips	1	798	January 7, 2021

How to maintain the snapmaker in perfect condition?

Related topics