Many people ask for the source code of firmware 1.7.0, and I will share the file here. Snapmaker Controller Snapmaker Modules

Yes. You can check this by scroll down the git log, I think it was based on some earlier version back in 2019 June. We use CuraEngine official build 3.6.0, CNCJS version is irrelevant since it’s been long since we forked, the functionalities are quite different in Luban now.

In searching the changes in 1.8 firmware it appears to me that backlash has been enabled! But I haven’t verified that yet with experiments. M425 gcode.

Rotary module is coming soon. PCB carving method is being tested Refactor the code based on FreeRTOS, and prepare the tools and documents needed for open source process. Linear Module Improvement Power supply improvement Levelling method improvement Proximity sensor improvement Heated bed improveme…

That’s very good to know. Thanks Edwin.

@Edwin . Thank you very much for providing the source code. I’m very excited about Snapmaker going openSource, and I understand the delay as many backers still have not received their hardware. I’m also very grateful for you sharing the roadmap. I do have one question about compatibility. Is the …

@yyg Sorry for the late reply. Is the Snapmaker v2.0 firmware also compatible with the original snapmaker? No If not, can you also share the source for the Snapmaker v1.0? I will ask the developer and share it here if it is available. I will keep you updated.

FYI, source code for Snapmaker Original firmware 2.11. Firmware-Snapmaker-2.11.7z Google Drive file.

@Edwin , I suggest you edit the topic to remove the “1.7.0” since this thread has other source listed.

As Scott said before, for now we have enabled FreeRTOS V10.3 in FW and testing its stability&reliability. We will continue to optimize the FW feature in next cycle. [image] A350 Platform Dimensions Snapmaker 2.0 @whimsycwd David, yes, I discovered that by doing a compare o…

Thank you @Edwin and the entire Snapmaker Team. I really appreciate it.

FYI:Source code of Snapmaker Firmware

Snapmaker 2.0 (3-in-1)

Edwin June 5, 2020, 7:42am 25

FYI, source code for Snapmaker Original firmware 2.11.

RJ45 and RJ25 pin assignments

Make the Original Snapmaker schematics open-source

4th Axis on a Snapmaker Original?

Comment changer le pas dans le script

Custom configurations

G-code commands for axis leveling against switches

M600 command for Snapmaker Original

Topic		Replies	Views
Snapmaker 2.0 Versions, Marlins, Updates, GITHUB Snapmaker 2.0 (3-in-1)	15	1417	February 23, 2024
Snapmaker 2.0 Firmware Updates and Downloads Update - Snapmaker2.0（3-in-1）	37	160679	March 14, 2026
Snapmaker 2.0 custom firmware Snapmaker 2.0 (3-in-1)	2	192	March 22, 2026
Remove Firmware Showcase & Prints	42	3768	January 6, 2023
SnapMaker 2 Marlin 2 gCode Support Snapmaker 2.0 (3-in-1)	11	6013	December 27, 2021

FYI:Source code of Snapmaker Firmware

Related topics