Full Lightburn Control Guide

[Skreelink]

Da ich kein Deutsch spreche, muss ich einen Übersetzer verwenden. Ich habe jedoch eine aktuellere Anleitung, die leichter zu befolgen sein sollte.

1064nm IR+20/40W + Lightburn Guide

With the new IR laser coming out, I figured testing and guides would follow. Lucky enough, it seems with minimal tweaks, Lightburn works with the new IR just fine. So here’s a guide on setting it up fully with Lightburn for auto-focusing and accurate results. Note; while I don’t have the 20/40W lasers, this guide SHOULD work for those as well. CONFIRMED WITH 40W I tested both USB connection, and using my Drag/Drop files I - Gathering Information You’ll need to find out homing pl…

Die Z-Höhe für den Start-G-Code des 10-W-Modells finden Sie hier.

1064nm IR+20/40W + Lightburn Guide

It should be 30mm, however, the easiest way to test (and similar to the focus bar method) would be to; 1: Do the platform height calibration. 2: Make a mock job and either send it to the machine or USB drive. 3: Start the job on the touchpad and choose manual thickness. 4: Touch the 10W laser to the platform and hit next. 5: When the laser moves up for you to set origin, tap the back button all the way back to the home screen. 6: Read the machine height from the control screen, that should…

Fragen können Sie gerne im aktualisierten Thread stellen. Ich werde versuchen, sie nach bestem Wissen und Gewissen zu beantworten.