Dear all, I know there is a discussion regarding “Connect Via WiFi” . My question/request is to be able to transfer GCode files via WiFi (network connection). Would it be possible to transfer to the Snapmaker Touchscreen drive via WiFi without using Luban? I use Simplify3D and would prefer to stil…

[image] geburges: If you want to change where the SnapMaker thinks Z=0 use the G92 command. Today I put G92 Z0.05 into the staring script of Simplify 3D. The result was that the Z axis just moved 0.05 down (or maybe tried to move up from the home position. I think I got this wrong. Where woul…

Yea, you’re on the right track but you have the behavior of G92 backwards. When you ran G92 Z0.05 you told the machine that right now, you are at Z=0.05. You would want like geburges said, Z0, to tell it that it is at Z0, because the first line of gcode will probably be referenced off of what the ma…

Hi Brent, good to see you again :slightly_smiling_face: I modified the S3D star tscript in the following way: [Screenshot 2020-10-27 201203] I would like to: Move to front position X-10 Y-10 Prime extruder with 20 mm Offset Z by +0.05 for the print …and then hopefully start printing without cr…

Hey, I guess you got it right. You preheat, move to xy-10 front left corner, move z 0, prime, set your z0 to z-0,05. Maybe you should move to your new z0 as last command, to avoid crashing (because of warped bed?).

Will the script work with *.nc files too? And if so, would it be possible to modify the context menu to support those files?

The above script is updated, check the version number. [image] brent113: Version V2: Added context menus for .nc and .cnc file extensions

Great work on this. Thank you. Now i can slice 3D prints in Cura and send to my A350. Love it.

And yet another. A filthy hack of a Cura plugin to send to gcode to your Snapmaker. You’re going to have to manually set your IP address in the script. Haven’t really tested it because my laser toolhead is on right now but it seems to be uploading. Feel free to dive into the nightmare that is the un…

I fear you still need to confirm on the machine?

File Transfer via WiFi

Snapmaker 2.0 (3-in-1)

brent113 November 4, 2020, 9:13pm 39

The above script is updated, check the version number.

Using Cura, How best to send GCode to Snapmaker?

Topic		Replies	Views
Upload files to any Snapmaker with right-click menu - Windows 11 guide + Alternatives Showcases & Tips Accessories	17	2236	November 16, 2024
Cura Snapmaker Plugin released Snapmaker 2.0 (3-in-1)	70	9820	February 6, 2024
Guide: Automatic Start via Drag/Drop Snapmaker 2.0 (3-in-1) Laser , Lightburn	31	4078	December 7, 2025
FEATURE REQUEST: Web Based Control Interface (Remote Control) Snapmaker 2.0 (3-in-1)	30	6335	November 29, 2024
Do Snapmaker 2.0 Devices Have a Webpage? Snapmaker 2.0 (3-in-1)	58	7635	August 4, 2025

File Transfer via WiFi

Related topics