Looks like the enclosure screws have been an issue for a while, I would recommend reaching out to support (support@snapmaker.com ) for replacement screws, it seems like the replacements tend to be higher quality.
A250 /A350 Enclosure Screws
I have just purchased my second A250 and enclosure.
However, I encountered a problem with the enclosure assembly bolts breaking.
M4x28 with thin thickness bolts.
Almost all of the 32 bolts cannot withstand during or after tightening and the heads of the screws come off and blow off.
The screw heads popped off after the enclosure was assembled, causing the enclosure to disassemble.
Please note that the strength of the screw is almost non-existent and the screw he…
Hello,
I have been putting together the encloser, and one of the heads to an M4x28 popped off clean right as it seated. After taking a break to grab a bite, I came back to show my wife and two of the heads literally shot off across the room.
I am just making these snug using the provided wrench, no unusual resistance etc…
Any idea what in the world is going on? I am guessing I should just order a tap and die set to back these out, and then order some fresh screws?
So far, I have not even unb…