Carriage Tolerances - Unusable Over Distance >75mm From Center

brvdboss · January 28, 2021, 4:25pm

Snapmaker/snapmaker_cnc_post_process/blob/master/gcode_reference.md

# Gcode Reference(Draft)

This is a short Gcode Reference regarding to CNC related feature for Snapmaker 2.0


## Overview

The Gcode that have been used in Snapmaker 2.0 is quite limited. 

Share your ideas to improve Snapmaker 2.0 in [forrm](https://forum.snapmaker.com/c/snapmaker-20/37)


## Reference

### G0 / G1

 The `G0` and `G1` commands add a linear move to the queue to be performed after all previous moves are completed. These commands yield control back to the command parser as soon as the move is queued, but they may delay the command parser while awaiting a slot in the queue.

A linear move traces a straight line from one point to another, ensuring that the specified axes will arrive simultaneously at the given coordinates (by linear interpolation). The speed may change over time following an acceleration curve, according to the acceleration and jerk settings of the given axes.

This file has been truncated. show original

But are you writing the gcode by hand? If you use Fusion360 or something it should do it for you (with the correct postprocessor).

Topic		Replies	Views
Circular Dimensional Accuracy, Out of Round Snapmaker 2.0	89	1696	March 21, 2024
Confused about xy calibration Snapmaker 2.0	4	380	March 15, 2023
Improving Dimensional Accuracy Snapmaker 2.0	6	1051	October 18, 2020
X-axis Unparallel to Base Plate (tramming issue) Snapmaker Original	4	1017	December 31, 2020
Centering of bed plate	3	1703	December 6, 2019

Carriage Tolerances - Unusable Over Distance >75mm From Center

Related Topics