Hello all, I have printed yesterday a threaded rod with a diameter of 30 mm and today some parts with larger holes (> 20mm). I noticed that the threaded rod is not quite round and also the holes are not really round. Habr you also had this before? I have drawn the parts with Fusion 360 and sliced…

Search can be your friend. [image] Circular Dimensional Accuracy, Out of Round Snapmaker 2.0 Anyone else have issues with circular errors? I’m going over my machine to try and get it to the level of engineering prototypes. Im a Mechanical Engineer by trade and just like…

Basically you really need to dial in your stepping. Bookmark this you will need it. https://teachingtechyt.github.io/calibration.html

I had same issue. Replaced one of the linear motors, and everything was round again. I think I had too much backlash in the rail, was getting worn out.

I had alot of rounds of this, its likely from oen or more of your linear modules being sloppy/loose. Theres a few threads from awhile back going into detail. I found one of them, Loose Linear Module w/ Workaround Attempt

Print is not quite round

Snapmaker 2.0 (3-in-1)

Spaced June 14, 2023, 11:42pm 2

Search can be your friend.

Topic		Replies	Views
Circular Dimensional Accuracy, Out of Round Snapmaker 2.0 (3-in-1)	90	3000	February 10, 2025
Round shapes is not in spec Snapmaker Luban	12	1713	January 10, 2021
Circles not printing perfectly round Showcases & Tips	17	6180	July 16, 2020
A350 - Not printing perfect circles Snapmaker 2.0 (3-in-1)	41	2815	August 12, 2021
Print accuracy and margin Snapmaker 2.0 (3-in-1)	14	1466	November 7, 2020

Print is not quite round

Related topics