Hello Snapmakers, I designd a litte helpertool to do automatic leveling on any surface you want. For myself i use a 3mm glasbed directly on the heatingbed.Works very well!!! Here the Link to thingiverse: [image] FiFix - The ultimative Levelingtool for Snapmaker 2.0 by Schnapsmaker FiFi…

@imD I dont know how they called in English but here is a Amazon.nl (dutch) link: LINK

same here, i have no clue what they are named in english, but it is called “schnellhefter” in german … you use them to bundle together sheets of paper like in a file/folder … i took it from one of those (was laying around). The older versions have metal strips, newer ones are using plastic instead …

Thanks @ilyad and @kopfkraft . I found a sheet of brass locally where I am at 0.25mm. I will just buy that and cut it out, just wanted to make sure. I printed the FiFix before it was taken down, never used it as I thought I would wait for the updated version, however I need something asap so I can fi…

@kopfkraft I just printed and used your design, worked as expected. needed some tweaking mainly from the materials I used. But excelent bed level now. I can’t wait for your revised bed leveling @stefix as for now I have to make my arm sore to hold my clip while it levels but it beats manual leveling…

Theres a ‘404’ error with the link at the start of this thread.

[image] A350 - printing on glass Snapmaker 2.0 @Mads0100 Its not online at the moment, but take this (2.7 MB) for now - same version as thingiverse. Its secured by a password, that I will send everyone who wants it, from my heart. Only send me a PM. I do it this way on…

Stefix wheres that 2.0 at mang lets do this! I got a revised 3dp module in my hands now and wana change out!

@MooseJuice Have frozen it at the moment, do bigger work to my SM. When its done (think next week) I will play with it again. Sorry but its a LOT of work. :muscle: Have had not even time to test my revised 3D printhead

@MooseJuice I will upgrade it to something like SM2.5 :+1: :smiling_face_with_three_hearts:

For all who want level on glass

Snapmaker 2.0 (3-in-1)

stefix February 27, 2021, 4:35pm 86

Topic		Replies	Views
A350 - printing on glass Snapmaker 2.0 (3-in-1)	133	16119	February 15, 2023
Automatic bed leveling on glass Snapmaker 2.0 (3-in-1)	48	3788	October 12, 2023
Manual Calibration Snapmaker 2.0 (3-in-1)	73	10564	July 24, 2022
On achieving a better leveling (With help from Snapmaker Devs) Snapmaker 2.0 (3-in-1)	41	4752	September 3, 2024
On achieving a perfect level Snapmaker 2.0 (3-in-1)	269	19330	March 3, 2023

For all who want level on glass

Related topics