Hi Guys, We have six Snapmaker machines with rotary modules and are engraving names on different items. We use Snapmaker Luban software to engrave the names, but it’s very cumbersome to use for multiple machines. The process currently involves the following steps: Upload the name file in PNG form…

Hi, Did you ever tried to use the web interface of luban? Open Luban > Window > View in Browser

It remembers a session token, can’t quite remember the file location, but user profile folder for luban or something similar. If you connect to the same machine after disconnecting then the token matches and no need to re-confirm connection via touchscreen. If you connect to a different machine or a…

If you are on a relatively new firmware and luban you could start the file by printing from Luban and then simply disconnect and the machine goes on. I would have a look into lightburn maybe there is a automatic routine for name tag engraving, don’t know but it’s the way to go for laser experts her…

As Wyphorn says, You should be able to open six versions of Luban in six windows tabs and leave them open. (Set windows to open those same tabs on start-up each day). Connect each tab to a different machine. And you should be able to leave everything the same, changing only the names each time and…

If you use my lightburn guides to set up lightburn + repeatable origin, then also setup my drag/drop files. Your flow would be to simply toss the material into the corner on the bed, do your project in Lightburn, export the gcode file, then drag/drop onto the sender file, which can be set up per-mac…

Thank you I’ll check that. Is there a way how to create batch of gcode files with names from few hundreds of png?

When I try to do it in browser and drag and drop png file it gives me error message [Screenshot 2024-11-10 at 11.22.16 am]

There’s no batch way to do that to my knowledge. However, once you have a good base layout, mass generating projects can go rather quickly. I like to do a non-output layer representation of my workpiece, then I can always accurately and quickly place what I need. An example; this was on a water bot…

I do not have problems with importing pngs: [image] :man_shrugging:

Okay, the PNG works now. However, when I open six tabs and connect each to a separate machine, it still starts engraving on last machine I connected to even it shows it’s connected to a diferrent machine in browser. Each tab has same ip address.

Faster Process to Manage Multiple Snapmaker Machines

Snapmaker 2.0 (3-in-1)

xchrisd November 16, 2024, 9:24am 16

1 Like

Topic		Replies	Views
Howto: Connect Multiple PCs to the Same Machine Snapmaker 2.0 (3-in-1)	0	571	April 8, 2023
Is it posible to open Luban multiple times on one computer Snapmaker Luban	3	81	November 6, 2024
A350 a very good hardware ---BUT Snapmaker 2.0 (3-in-1)	5	700	January 27, 2021
Problème pour générer un g.code avec le logiciel snapmaker Snapmaker Luban	5	1072	November 26, 2020
Layered Laser Designs Snapmaker Luban	3	1143	November 12, 2022

Faster Process to Manage Multiple Snapmaker Machines

Related topics