Hi guys, I am trying different options for the CNC module, one of which is Carbide Create. I’m sure I saw it mentioned on here previously that someone had it working with the Snapmaker 2? I did a search but couldn’t for the life of me find the correct thread. So I made my design in carbide and save…

Carbide create outputs grbl code, which allows for motion to be specified just with a coordinate and not a movement command. This firmware was compiled without support for that, but it’s trivial to add to the firmware. If you want to not change firmware you’ll need to apply a regular expression to …

Hi Brent Thanks for the reply, much appreciated. I have absolutely no coding experience at all, although I am willing to give it a go. I have read the attached thread, however it makes little sense to me i’m afraid. Is there any chance you could make a simple (and I mean simple!) fools guide for me…

I found this after a lot of bodging around with search engines: https://gist.github.com/pablinhob/5b4a28e6b459bf64f90c No idea whether it works, but it should be a simple matter of installing python and running the script, then seeing whether the Snapmaker will take what comes out of the other end. …

@ElloryJaye Looking through that, it’s actually not complete enough, it doesn’t handle lines with multiple parameters starting with F or spaces in commands. Any single line starting with I-J, P-Q, X-Z, and E-F is valid. Although that could be used as a start to make something more inline with the c…

Hi Brent…did the CC to SnapMaker2 interface work out. I find myself suffering with Luban, But I been using CC for a couple years and would much use CC. Tried Carveco (old artcam) but the files wont load, and the postprocessor hasn’t been updated for years. If you can shed any light on the subject…

Carbide Create queries

Snapmaker 2.0 (3-in-1)

ElloryJaye January 17, 2022, 1:24pm 7

You can try the script from here if you like: Grbl to Snapmaker Marlin g-code converter . Feedback is still welcome if you find something that doesn’t work.

Topic		Replies	Views
Grbl to Snapmaker Marlin g-code converter Snapmaker 2.0 (3-in-1)	17	4164	November 18, 2024
Post Processor Required for CNC? Snapmaker 2.0 (3-in-1)	42	10061	October 19, 2024
CNC Carving Capability Test Showcases & Tips	25	8870	July 26, 2018
Cannot execute gcode files from Aspire Snapmaker 2.0 (3-in-1)	3	1016	February 13, 2020
Carbide Create and Snapmaker2 Snapmaker 2.0 (3-in-1)	52	5581	October 8, 2020

Carbide Create queries

Related topics