I’m not sure this will be useful to anyone, but after recently deciding to check the bed warping of my F250, I ran the M420 V command and saw a bunch of numbers. Since I was too lazy to dig into them, I just asked Copilot to visualize the bed map from the data — and voilà, I got a 3D map clearly sho…

If you want to go down the rabbit hole of Snapmaker 2.0 bed levelling, here some recommended reads: [image] Bed Leveling - Revisited & Detailed Snapmaker 2.0 (3-in-1) Intro Lots of people have had issues with the bed levelling for 3D printing on the Snapmaker…

This would also worth try for the dual extruder: [image] Dual extruder bed leveling gcodes missing Snapmaker 2.0 (3-in-1) The gcodes used by the Android remote are M3002 and M3003, but one needs to run multiple commands in series to achieve full leveling. ; T…

Bed level

Snapmaker 2.0 (3-in-1)

xchrisd December 28, 2025, 8:35pm 3

This would also worth try for the dual extruder:

Topic		Replies	Views
Bed Leveling - Revisited & Detailed Snapmaker 2.0 (3-in-1)	34	9794	July 29, 2024
SM2 Bed Leveling Feedback Snapmaker 2.0 (3-in-1)	23	1909	February 26, 2023
SM2 Bed Leveling 101 Snapmaker 2.0 (3-in-1)	142	19884	January 25, 2023
On achieving a better leveling (With help from Snapmaker Devs) Snapmaker 2.0 (3-in-1)	41	4861	September 3, 2024
A350 bed far from level Snapmaker 2.0 (3-in-1)	12	1395	January 17, 2023

Bed level

Related topics