Hello everyone,
I am selling my Snapmaker 2.0 A250, along with the enclosure and other accessories/spare parts I have purchased over the months, for US$1250.
I have used it sporadically for about a year, with less than 200 hours usage on the 3D printing module only. The laser and CNC modules are untouched. I will also include 2 brand new 3D modules, 1x v2.0 and 1x v2.5. (More details below).
I have no complaints at all; it is a fantastic 3-in-1 machine, and I even used it to 3D print specimens for my university final year project! I’m selling it because I won’t have time to use the laser and CNC modules, so I decided to try to find a better home for it.
I stay in Singapore, but I am open to discussing overseas shipping options if anyone is interested.
Further details:
What you will get:
- Snapmaker A250 in original box with original accessories.
- Snapmaker A250 Enclosure in original box.
- Other accessories/spare parts that I have purchased over the past year.
Total Usage:
- CNC: UNUSED
- Laser: UNUSED
- 3D Printing: less than 200 hours in the past 1 year (see note 3 below)
NOTES on the SM A250:
-
UNUSED laser engraving and CNC modules.
-
Brand 2x new 3D Printing modules, 1 each of version 2.0 version 2.5. The old one short-circuited the system once, but seemed to work fine later on. However, I still got a replacement under warranty. I also separately purchased the upgraded version (v2.5) from Snapmaker for US$133 including shipping (around SG$17). In total, you will get 3x 3D PRINTING MODULES. I would recommending not to use the old one, but you can take it apart to explore if you want to.
-
EXTRA 3D Printer hot end kits X12. I purchased many extras to ensure that there wouldn’t be any disruptions while I was printing the specimens for my final year project.
-
EXTRA CNC/Laser engraving materials bundle
-
EXTRA 3D Printing flexible beds X2
-
EXTRA Materials bundle (Carbon fibre sheets, Basswood sheets, MDF sheets)
-
EXTRA CNC waste board & 5 pcs CNC Bits set.
-
EXTRA Platform. The original one had 1 untapped hole, so I requested a new one under warranty. However, the heated bed can still be fixed onto it, just leave out 1 screw.
-
The original Snapmaker PLA Filament that came in the box has been used. I will replace it with 1 spool of 3D Aura PLA filament (this is a local reputable brand in Singapore).
NOTE on the ENCLOSURE:
I drilled a hole in the top acrylic panel to feed the filament through to the printer. This is a better location for the hole than the original hole, which is on the side panel.
